Add clock support for the Artpec-6 SoC port. The ARM parts are in the series "arm: Add Artpec-6 SoC" and it goes through the arm-soc tree. Changes since v2: - Moved axis,artpec6-clkctrl.h to the first patch with the DT bindings. Changes since v1: - The driver now provides all clocks from the main clock controller block through one DT node. - Added a header file for the clock indexes. - Refer to clock-bindings.txt in the bindings document. A platform driver was not possible because the clocks are needed earlier in the kernel startup. Lars Persson (2): clk: add device tree binding for Artpec-6 clock controller clk: add artpec-6 clock controller .../devicetree/bindings/clock/artpec6.txt | 41 +++++ drivers/clk/Makefile | 1 + drivers/clk/axis/Makefile | 1 + drivers/clk/axis/clk-artpec6.c | 177 +++++++++++++++++++++ include/dt-bindings/clock/axis,artpec6-clkctrl.h | 38 +++++ 5 files changed, 258 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/artpec6.txt create mode 100644 drivers/clk/axis/Makefile create mode 100644 drivers/clk/axis/clk-artpec6.c create mode 100644 include/dt-bindings/clock/axis,artpec6-clkctrl.h -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html