Hi Tiffany, On 02/24/16 09:23, tiffany lin wrote: > Hi Hans, > > On Tue, 2016-02-23 at 09:47 +0100, Hans Verkuil wrote: >> On 02/23/16 09:11, Tiffany Lin wrote: >>> ============== >>> Introduction >>> ============== >>> >>> The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs. >>> Mediatek Video Codec is able to handle video encoding of in a range of formats. >>> >>> This patch series also include VPU driver. Mediatek Video Codec driver rely on VPU driver to load, >>> communicate with VPU. >>> >>> Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI. >>> MTK IOMMU[1] and MTK SMI[2] have not yet been merged, but we wanted to start discussion about the driver >>> earlier so it could be merged sooner. >>> >>> [1]https://patchwork.kernel.org/patch/8335461/ >>> [2]https://patchwork.kernel.org/patch/7596181/ >> >> <snip> >> >>> v4l2-compliance test output: >>> localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1 >>> Driver Info: >>> Driver name : mtk-vcodec-enc >>> Card type : platform:mt8173 >>> Bus info : platform:mt8173 >>> Driver version: 4.4.0 >>> Capabilities : 0x84204000 >>> Video Memory-to-Memory Multiplanar >>> Streaming >>> Extended Pix Format >>> Device Capabilities >>> Device Caps : 0x04204000 >>> Video Memory-to-Memory Multiplanar >>> Streaming >>> Extended Pix Format >>> >>> Compliance test for device /dev/video1 (not using libv4l2): >>> >>> Required ioctls: >>> test VIDIOC_QUERYCAP: OK >>> >>> Allow for multiple opens: >>> test second video open: OK >>> test VIDIOC_QUERYCAP: OK >>> test VIDIOC_G/S_PRIORITY: OK >>> >>> Debug ioctls: >>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) >>> test VIDIOC_LOG_STATUS: OK (Not Supported) >>> >>> Input ioctls: >>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported) >>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) >>> test VIDIOC_ENUMAUDIO: OK (Not Supported) >>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) >>> test VIDIOC_G/S_AUDIO: OK (Not Supported) >>> Inputs: 0 Audio Inputs: 0 Tuners: 0 >>> >>> Output ioctls: >>> test VIDIOC_G/S_MODULATOR: OK (Not Supported) >>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported) >>> test VIDIOC_ENUMAUDOUT: OK (Not Supported) >>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) >>> test VIDIOC_G/S_AUDOUT: OK (Not Supported) >>> Outputs: 0 Audio Outputs: 0 Modulators: 0 >>> >>> Input/Output configuration ioctls: >>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) >>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) >>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) >>> test VIDIOC_G/S_EDID: OK (Not Supported) >>> >>> Control ioctls: >>> test VIDIOC_QUERYCTRL/MENU: OK >>> test VIDIOC_G/S_CTRL: OK >>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK >>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK >>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) >>> Standard Controls: 12 Private Controls: 0 >>> >>> Format ioctls: >>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK >>> test VIDIOC_G/S_PARM: OK >>> test VIDIOC_G_FBUF: OK (Not Supported) >>> test VIDIOC_G_FMT: OK >>> test VIDIOC_TRY_FMT: OK >>> test VIDIOC_S_FMT: OK >>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) >>> >>> Codec ioctls: >>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) >>> test VIDIOC_G_ENC_INDEX: OK (Not Supported) >>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) >>> >>> Buffer ioctls: >>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK >>> test VIDIOC_EXPBUF: OK >>> >>> Total: 38, Succeeded: 38, Failed: 0, Warnings: 0 >> >> Nice! >> >> Can you try 'v4l2-compliance -s'? Note that this may not work since I know >> that v4l2-compliance doesn't work all that well with codecs, but I am >> curious what the output is when you try streaming. >> >> Don't bother trying to chase down reported failures, those are likely from >> v4l2-compliance itself. It is something I would like to improve, but -ENOTIME. >> > > When I try to run 'v4l2-compliance -d /dev/video1 -s, I got follow > output. > I use v4.4-rc5 kernel and v4l-utils 1.6 version. Can you compile v4l2-compliance straight from the v4l-utils.git master branch? Version 1.6 is too old, and for proper compliance testing you should always use the master branch. It probably won't matter for this -s test, but for the regular test (without -s) it does make a difference. If nothing else, using the master branch will make it easier for me to match up the line numbers that v4l2-compliance reports to the actual source. Thanks! Hans > > Streaming ioctls: > test read/write: OK (Not Supported) > fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(332): buf.querybuf(node, i) fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(868): testQueryBuf(node, cur_fmt.type, q.g_buffers()) > test MMAP: FAIL > fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(923): ret && ret != ENOTTY > > fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(988): setupUserPtr(node, q) > test USERPTR: FAIL > test DMABUF: Cannot test, specify --expbuf-device > > best regards, > Tiffany > >> Regards, >> >> Hans > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
