Re: [PATCH v3 1/2] devicetree: Add UCS1002 USB Port Power Controller binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Feb 23, 2016 at 08:27:04AM +0100, Enric Balletbo i Serra wrote:
> The UCS1002-2 provides a USB port power switch for precise control of up
> to 2.5 amperes continuous current.
> 
> You can add support to your board with current binding.
> 
> Example:
> 
>     ucs1002: ucs1002@57 {
>              compatible = "microchip,ucs1002";
>              reg = <0x57>;
>     };
> 
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> ---
> Changes since v2:
>  - Rename microchip,current-limit to microchip,limit-microamps (Rob Herring)
> Changes since v1:
>  - Fix units, are microamps (Rob Herring)
>  - Remove microchip,pin-ignore as is implied by absence of gpio properties (Rob
>    Herring)
>  - Group control gpios instead of use separate gpios. All control gpios must be
>    set together (Enric Balletbo)
> 
>  .../devicetree/bindings/power/ucs1002.txt          | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/ucs1002.txt

Acked-by: Rob Herring <robh@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux