On Thu, Feb 18, 2016 at 09:06:08AM +0800, Zhao Qiang wrote: > Add uqe_serial document to > Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt > > Signed-off-by: Zhao Qiang <qiang.zhao@xxxxxxx> > --- > Changes for v2 > - modify tx/rx-clock-name specification > > .../bindings/powerpc/fsl/cpm_qe/uqe_serial.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt > > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt > new file mode 100644 > index 0000000..436c71c > --- /dev/null > +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/uqe_serial.txt > @@ -0,0 +1,19 @@ > +* Serial > + > +Currently defined compatibles: > +- ucc_uart > + > +Properties for ucc_uart: > +port-number : port number of UCC-UART How is this used? > +tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source, > + should be "clk1"-"clk28" for external clock source. Perhaps you should be using the clock binding here and in other bindings? > + > +Example: > + > + ucc_serial: ucc@2200 { > + device_type = "serial"; > + compatible = "ucc_uart"; > + port-number = <1>; > + rx-clock-name = "brg2"; > + tx-clock-name = "brg2"; > + }; > -- > 2.1.0.27.g96db324 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html