Hi, @Tony Patches 15 and 24 are new and will need your review. I've modified patch 22 to include the new am335x boards introduced since v4.4. Patches are based on top of omap-for-v4.6/dt so that the DT changes apply cleanly. @Brian If you can Ack the MTD related changes we can push the series (excluding DT patches) to an immutable branch and you can then pull it into l2-mtd.git Patches tested on: dra-evm, am437x-gp-evm, beagleboard-c4, beagleboard-c4-legacyboot Changelog: v5: -changed ready/busy# GPIO DT binding from "ready-gpio" to "rb-gpios". -use irqdomain for gpmc NAND interrupts: fifoevent and termcount v4: -Warn if using older incompatible DT i.e. compatible property not present in nand node. -Applied Tony's patch to fix broken ethernet on torpedo. v3: -Fixed and tested NAND using legacy boot on omap3-beagle. -Support rising and falling edge interrupts on WAITpins. -Update DT node of all gpmc users. Patches summary: We do a couple of things in this series which result in cleaner device tree implementation, faster perfomance and multi-platform support. As an added bonus we get to use the GPMC_WAIT pins as GPI/Interrupts. - Establish a custom interface between NAND and GPMC driver. This is needed because all of the NAND registers sit in the GPMC register space. - Clean up device tree support so that omap-gpmc IP and the omap2 NAND driver can be used on non-OMAP platforms. e.g. Keystone. - Implement GPIOCHIP for the GPMC WAITPINS. SoCs can contain 2 to 4 of these and most of them would be unused otherwise. It also allows a cleaner implementation of NAND Ready pin status for the NAND driver. - Implement GPMC IRQ domain to proivde the 2 NAND events and GPMC WAITPIN edge interrupts. - Implement GPIOlib based NAND ready pin checking for OMAP NAND driver. On dra7-evm, Read speed increases from 13768 KiB/ to 17246 KiB/s. Write speed was unchanged at 7123 KiB/s. This series is available at git@xxxxxxxxxx:rogerq/linux.git in branch for-v4.6/gpmc-v5 -- cheers, -roger Roger Quadros (26): ARM: OMAP2+: gpmc: Add platform data ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data memory: omap-gpmc: Introduce GPMC to NAND interface mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check memory: omap-gpmc: Implement IRQ domain for NAND IRQs mtd: nand: omap: Copy platform data parameters to omap_nand_info data mtd: nand: omap: Clean up device tree support mtd: nand: omap: Update DT binding documentation memory: omap-gpmc: Prevent mapping into 1st 16MB memory: omap-gpmc: Move device tree binding to correct location memory: omap-gpmc: Support general purpose input for WAITPINs memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring memory: omap-gpmc: Support WAIT pin edge interrupts memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs mtd: nand: omap2: Implement NAND ready using gpiolib ARM: dts: dra7: Fix NAND device nodes. ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: am437x: Fix NAND device nodes ARM: dts: am437x: Provide NAND ready pin ARM: dts: am335x: Fix NAND device nodes ARM: dts: am335x: Provide NAND ready pin ARM: dts: dm814x: Fix gpmc and NAND node ARM: dts: dm816x: Fix gpmc and NAND node ARM: dts: omap3: Fix gpmc and NAND nodes Documentation/devicetree/bindings/bus/ti-gpmc.txt | 130 ---- .../bindings/memory-controllers/omap-gpmc.txt | 141 +++++ .../devicetree/bindings/mtd/gpmc-nand.txt | 19 +- arch/arm/boot/dts/am335x-baltos-ir5221.dts | 10 +- arch/arm/boot/dts/am335x-chilisom.dtsi | 9 +- arch/arm/boot/dts/am335x-cm-t335.dts | 10 +- arch/arm/boot/dts/am335x-evm.dts | 8 +- arch/arm/boot/dts/am335x-igep0033.dtsi | 9 +- arch/arm/boot/dts/am335x-phycore-som.dtsi | 9 +- arch/arm/boot/dts/am33xx.dtsi | 4 + arch/arm/boot/dts/am4372.dtsi | 4 + arch/arm/boot/dts/am437x-cm-t43.dts | 7 +- arch/arm/boot/dts/am437x-gp-evm.dts | 9 +- arch/arm/boot/dts/am43x-epos-evm.dts | 9 +- arch/arm/boot/dts/dm8148-evm.dts | 8 +- arch/arm/boot/dts/dm814x.dtsi | 4 + arch/arm/boot/dts/dm8168-evm.dts | 8 +- arch/arm/boot/dts/dm816x.dtsi | 4 + arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 +- arch/arm/boot/dts/dra7-evm.dts | 7 +- arch/arm/boot/dts/dra7.dtsi | 4 + arch/arm/boot/dts/dra72-evm.dts | 7 +- arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 3 +- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 +- arch/arm/boot/dts/omap3-beagle.dts | 5 +- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 6 +- arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 4 + arch/arm/boot/dts/omap3-evm-37xx.dts | 8 +- arch/arm/boot/dts/omap3-gta04.dtsi | 4 + arch/arm/boot/dts/omap3-igep.dtsi | 6 +- arch/arm/boot/dts/omap3-igep0020-common.dtsi | 4 +- arch/arm/boot/dts/omap3-igep0030-common.dtsi | 4 + arch/arm/boot/dts/omap3-ldp.dts | 10 +- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 6 +- arch/arm/boot/dts/omap3-overo-base.dtsi | 6 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 4 + arch/arm/boot/dts/omap3-tao3530.dtsi | 6 +- arch/arm/boot/dts/omap3.dtsi | 4 + arch/arm/boot/dts/omap3430-sdp.dts | 6 +- arch/arm/mach-omap2/gpmc-nand.c | 7 +- drivers/memory/Kconfig | 1 + drivers/memory/omap-gpmc.c | 653 +++++++++++++-------- drivers/mtd/nand/omap2.c | 193 ++++-- include/linux/omap-gpmc.h | 177 ++---- include/linux/platform_data/gpmc-omap.h | 167 ++++++ include/linux/platform_data/mtd-nand-omap2.h | 12 +- 46 files changed, 1121 insertions(+), 611 deletions(-) delete mode 100644 Documentation/devicetree/bindings/bus/ti-gpmc.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt create mode 100644 include/linux/platform_data/gpmc-omap.h -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html