Am Freitag, den 19.02.2016, 16:31 +0800 schrieb Jitao Shi:
> Add documentation for DT properties supported by
> ps8640 DSI-eDP converter.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> ---
> Changes since v9:
> - No change
> ---
> .../devicetree/bindings/display/bridge/ps8640.txt | 43 ++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ps8640.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.txt b/Documentation/devicetree/bindings/display/bridge/ps8640.txt
> new file mode 100644
> index 0000000..a3e0971
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.txt
> @@ -0,0 +1,43 @@
> +ps8640-bridge bindings
> +
> +Required properties:
> + - compatible: "parade,ps8640"
> + - reg: first page address of the bridge.
> + - sleep-gpios: OF device-tree gpio specification for PD_ pin.
> + - reset-gpios: OF device-tree gpio specification for reset pin.
> + - mode-sel-gpios: OF device-tree gpio specification for mode-sel pin.
> + - vdd12-supply: OF device-tree regulator specification for 1.2V power.
> + - vdd33-supply: OF device-tree regulator specification for 3.3V power.
> + - ports: The device node can contain video interface port nodes per
> + the video-interfaces bind[1]. For port@0,set the reg = <0> as
> + ps8640 dsi in and port@1,set the reg = <1> as ps8640 eDP out.
> +
> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> + edp-bridge@18 {
> + compatible = "parade,ps8640";
> + reg = <0x18>;
> + sleep-gpios = <&pio 116 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>;
Are these two really active high? See my comments on the driver patch.
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
