Re: [1/4] arm64: Broadcom Vulcan support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




+ bcm-kernel-feedback-list mailing list

On 2/13/2016 10:46 AM, Jayachandran C. wrote:
From: Zi Shen Lim <zlim@xxxxxxxxxxxx>

Add a configuration option and a device tree for Broadcom's Vulcan
ARM64 processor. brcm-vulcan.dtsi has the on-chip blocks like the
PCIe controller, GICv3 with ITS, PMU, system timer and pl011 UART.
brcm-vulcan-eval.dts has definitions for a basic evaluation board.
The firmware supports PSCI 0.2 for cpu wakeup.

Signed-off-by: Zi Shen Lim <zlim@xxxxxxxxxxxx>
[ updated and split dts - jchandra@xxxxxxxxxxxx ]
Signed-off-by: Jayachandran C <jchandra@xxxxxxxxxxxx>

---
arch/arm64/Kconfig.platforms                      |   5 +
 arch/arm64/boot/dts/broadcom/Makefile             |   1 +
 arch/arm64/boot/dts/broadcom/brcm-vulcan-eval.dts |  33 +++++
 arch/arm64/boot/dts/broadcom/brcm-vulcan.dtsi     | 146 ++++++++++++++++++++++
 4 files changed, 185 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/brcm-vulcan-eval.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/brcm-vulcan.dtsi

Could you please name the files "vulcan.dtsi" and "vulcan-eval.dts" so it's consistent with the rest of files in the same directory?

Thanks,

Ray
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux