Re: [PATCH v2 28/29] serial: sh-sci: Add device tree bindings documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Sergei,

On Sunday 10 November 2013 22:07:16 Sergei Shtylyov wrote:
> On 10-11-2013 7:33, Laurent Pinchart wrote:
> > Document the device tree bindings for the sci serial port devices.
> > 
> > Cc: devicetree@xxxxxxxxxxxxxxx
> 
> Hm, why are you not CCing a bunch of people responsible for the DT bindings
> maintenance that scripts/get_maintainer.pl should yield?

Because they're subscribed to the devicetree list, and they're already 
overwhelmed with e-mails.

> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > Acked-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> > ---
> > 
> >   .../bindings/serial/renesas,sci-serial.txt         | 42 ++++++++++++++++
> >   1 file changed, 42 insertions(+)
> >   create mode 100644
> >   Documentation/devicetree/bindings/serial/renesas,sci-serial.txt> 
> > diff --git
> > a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
> > b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt new
> > file mode 100644
> > index 0000000..66d3bca
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
> > @@ -0,0 +1,42 @@
> > +* Renesas SH-Mobile Serial Communication Interface
> > +
> > +Required properties:
> > +
> > +  - compatible: one of the following types (scif, scifa, scifb, hscif).
> > +
> > +    - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
> > +    - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible
> > UART.
> > +    - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible
> > UART.
> > +    - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible
> > UART.
> > +    - "renesas,scif-generic" for generic SCIF compatible UART.
> > +    - "renesas,scifa-generic" for generic SCIFA compatible UART.
> > +    - "renesas,scifb-generic" for generic SCIFB compatible UART.
> > +    - "renesas,hscif-generic" for generic HSCIF compatible UART.
> > +
> > +    When compatible with the generic version, nodes must also list the
> > +    SoC-specific version corresponding to the platform.
> 
> Which are not all specified here?

The r8a7790-specific versions are. Other SoCs will be added later when ported 
to SCIF DT.

> > +
> > +  - reg: Base address and length of the memory resource used by the UART.
> > +
> > +  - interrupt-parent: Reference to the parent interrupt controller.
> 
>     This is not a required property. It can be specified in the parent node.

But in practice it isn't for the SCIF devices.

Given that we'll soon get a new way to specify interrupts, I think I'll just 
reference the corresponding DT bindings document when it will be updated 
instead of documenting all possibilities here.

> > +  - interrupts: Interrupt number.
> 
>     s/number/specifier/

I'll fix that.

> 
> > +
> > +  - clocks: Reference to the SCIx UART interface clock.
> > +  - clock-names: Should be "sci_ick".
> > +
> > +Note: Each enabled SCIx UART should have an alias correctly numbered in
> > the +"aliases" node.
> > +
> > +Example:
> > +	aliases {
> > +		serial0 = &scifa0;
> > +	};
> > +
> > +	scifa0: serial@e6c40000 {
> > +		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
> > +		reg = <0 0xe6c40000 0 64>;
> > +		interrupt-parent = <&gic>;
> > +		interrupts = <0 144 4>;
> > +		clocks = <&mstp2_clks 4>;
> > +		clock-names = "sci_ick";
> > +	};

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux