On 10-11-2013 7:33, Laurent Pinchart wrote:
Document the device tree bindings for the sci serial port devices.
Cc: devicetree@xxxxxxxxxxxxxxx
Hm, why are you not CCing a bunch of people responsible for the DT
bindings maintenance that scripts/get_maintainer.pl should yield?
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Acked-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
.../bindings/serial/renesas,sci-serial.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
new file mode 100644
index 0000000..66d3bca
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -0,0 +1,42 @@
+* Renesas SH-Mobile Serial Communication Interface
+
+Required properties:
+
+ - compatible: one of the following types (scif, scifa, scifb, hscif).
+
+ - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
+ - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
+ - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
+ - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
+ - "renesas,scif-generic" for generic SCIF compatible UART.
+ - "renesas,scifa-generic" for generic SCIFA compatible UART.
+ - "renesas,scifb-generic" for generic SCIFB compatible UART.
+ - "renesas,hscif-generic" for generic HSCIF compatible UART.
+
+ When compatible with the generic version, nodes must also list the
+ SoC-specific version corresponding to the platform.
Which are not all specified here?
+
+ - reg: Base address and length of the memory resource used by the UART.
+
+ - interrupt-parent: Reference to the parent interrupt controller.
This is not a required property. It can be specified in the parent node.
+ - interrupts: Interrupt number.
s/number/specifier/
+
+ - clocks: Reference to the SCIx UART interface clock.
+ - clock-names: Should be "sci_ick".
+
+Note: Each enabled SCIx UART should have an alias correctly numbered in the
+"aliases" node.
+
+Example:
+ aliases {
+ serial0 = &scifa0;
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+ reg = <0 0xe6c40000 0 64>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 144 4>;
+ clocks = <&mstp2_clks 4>;
+ clock-names = "sci_ick";
+ };
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
