Display Port monitor could support kinds of mode which indicate in monitor edid, not just one single display resolution which defined in panel or devivetree property display timing. Note: Gustavo Padovan try to remove the controller and phy power on function in bind time at bellow commit: drm/exynos: do not start enabling DP at bind() phase But for now driver need to read edid message in .get_modes() function, so controller must be inited in bind time, so we need to add controller init back. Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx> Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> --- Changes in v14: None Changes in v13: None Changes in v12: None Changes in v11: None Changes in v10: None Changes in v9: None Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: - Call drm_panel_prepare() in .get_modes function, ensure panel should power on before driver try to read edid message. Changes in v3: - Add edid modes parse support Changes in v2: None drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 17 ++++---- drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 46 +++++++++++----------- 2 files changed, 33 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index cfdf695..bc59e8d 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -110,7 +110,7 @@ static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data) static int analogix_dp_read_edid(struct analogix_dp_device *dp) { - unsigned char edid[EDID_BLOCK_LENGTH * 2]; + unsigned char *edid = dp->edid; unsigned int extend_block = 0; unsigned char sum; unsigned char test_vector; @@ -904,12 +904,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) DRM_ERROR("failed to disable the panel\n"); } - ret = analogix_dp_handle_edid(dp); - if (ret) { - dev_err(dp->dev, "unable to handle edid\n"); - return; - } - ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count, dp->video_info.max_link_rate); if (ret) { @@ -939,8 +933,14 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) int analogix_dp_get_modes(struct drm_connector *connector) { struct analogix_dp_device *dp = to_dp(connector); + struct edid *edid = (struct edid *)dp->edid; int num_modes = 0; + if (analogix_dp_handle_edid(dp) == 0) { + drm_mode_connector_update_edid_property(&dp->connector, edid); + num_modes += drm_add_edid_modes(&dp->connector, edid); + } + if (dp->plat_data->panel) num_modes += drm_panel_get_modes(dp->plat_data->panel); @@ -978,6 +978,7 @@ static void analogix_dp_connector_destroy(struct drm_connector *connector) { drm_connector_unregister(connector); drm_connector_cleanup(connector); + } static const struct drm_connector_funcs analogix_dp_connector_funcs = { @@ -1348,6 +1349,8 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, } } + analogix_dp_init_dp(dp); + ret = devm_request_irq(&pdev->dev, dp->irq, analogix_dp_irq_handler, irq_flags, "analogix-dp", dp); if (ret) { diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h index 22aff07..48b4a87 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h @@ -20,6 +20,28 @@ #define MAX_CR_LOOP 5 #define MAX_EQ_LOOP 5 +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR 0x50 +#define I2C_E_EDID_DEVICE_ADDR 0x30 + +#define EDID_BLOCK_LENGTH 0x80 +#define EDID_HEADER_PATTERN 0x00 +#define EDID_EXTENSION_FLAG 0x7e +#define EDID_CHECKSUM 0x7f + +/* DP_MAX_LANE_COUNT */ +#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1) +#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f) + +/* DP_LANE_COUNT_SET */ +#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f) + +/* DP_TRAINING_LANE0_SET */ +#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3) +#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3) +#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0) +#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3) + enum link_lane_count_type { LANE_COUNT1 = 1, LANE_COUNT2 = 2, @@ -155,6 +177,7 @@ struct analogix_dp_device { int dpms_mode; int hpd_gpio; bool force_hpd; + unsigned char edid[EDID_BLOCK_LENGTH * 2]; struct analogix_dp_plat_data *plat_data; }; @@ -254,27 +277,4 @@ int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp); void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp); void analogix_dp_enable_scrambling(struct analogix_dp_device *dp); void analogix_dp_disable_scrambling(struct analogix_dp_device *dp); - -/* I2C EDID Chip ID, Slave Address */ -#define I2C_EDID_DEVICE_ADDR 0x50 -#define I2C_E_EDID_DEVICE_ADDR 0x30 - -#define EDID_BLOCK_LENGTH 0x80 -#define EDID_HEADER_PATTERN 0x00 -#define EDID_EXTENSION_FLAG 0x7e -#define EDID_CHECKSUM 0x7f - -/* DP_MAX_LANE_COUNT */ -#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1) -#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f) - -/* DP_LANE_COUNT_SET */ -#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f) - -/* DP_TRAINING_LANE0_SET */ -#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3) -#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3) -#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0) -#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3) - #endif /* _ANALOGIX_DP_CORE_H */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html