On Tue, Jan 19, 2016 at 03:32:44PM +0530, Sricharan R wrote:
> QUP cores can be attached to a BAM module, which acts as
> a dma engine for the QUP core. When DMA with BAM is enabled,
> the BAM consumer pipe transmitted data is written to the
> output FIFO and the BAM producer pipe received data is read
> from the input FIFO.
>
> With BAM capabilities, qup-i2c core can transfer more than
> 256 bytes, without a 'stop' which is not possible otherwise.
>
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> Reviewed-by: Andy Gross <andy.gross@xxxxxxxxxx>
> Tested-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
> Tested-by: Telkar Nagender <ntelkar@xxxxxxxxxxxxxx>
My code checkers found some issues:
SPARSE
drivers/i2c/busses/i2c-qup.c:555:6: warning: symbol 'qup_sg_set_buf' was not declared. Should it be static?
drivers/i2c/busses/i2c-qup.c:1243:50: warning: dubious: !x & !y
SMATCH
drivers/i2c/busses/i2c-qup.c:165 qup_sg_set_buf warn: unused return: s = sg_next()
drivers/i2c/busses/i2c-qup.c:165 qup_sg_set_buf warn: unused return: s = sg_next()
drivers/i2c/busses/i2c-qup.c:1243 qup_i2c_xfer_v2() warn: add some parenthesis here?
CPPCHECK
drivers/i2c/busses/i2c-qup.c:1243: style: Boolean result is used in bitwise operation. Clarify expression with parentheses.
SPATCH
drivers/i2c/busses/i2c-qup.c:1380:2-13: WARNING: Assignment of bool to 0/1
drivers/i2c/busses/i2c-qup.c:1481:1-13: WARNING: Assignment of bool to 0/1
CC drivers/i2c/busses/i2c-qup.o
drivers/i2c/busses/i2c-qup.c:555:6: warning: no previous prototype for 'qup_sg_set_buf' [-Wmissing-prototypes]
void qup_sg_set_buf(struct scatterlist *sg, void *buf, struct qup_i2c_tag *tg,
Can you fix them and resend??
Thanks,
Wolfram
Attachment:
signature.asc
Description: Digital signature
