Re: [PATCH v2 5/5] ARM: dts: r8a7794: add sound support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/10/2016 08:14 PM, Simon Horman wrote:

Sorry for my un-ordered response

Define the generic R8A7794 part of  the sound device node.
This sound device  is a complex one and comprises the Audio Clock Generator
(ADG), Sampling Rate Converter Unit (SCU), Serial Sound Interface [Unit]
(SSI[U]), and Audio DMAC-Peripheral-Peripheral.
It is up  to the board file to enable the device.

This patch is based on the R8A7791 sound work by Kuninori Morimoto.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
(snip)
+		rcar_sound,src {
+			src1: src@1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x87>, <&audma0 0x9c>;
+				dma-names = "rx", "tx";
+			};
+			src2: src@2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x89>, <&audma0 0x9e>;
+				dma-names = "rx", "tx";
+			};
+			src3: src@3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+				dma-names = "rx", "tx";
+			};
+			src4: src@4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+				dma-names = "rx", "tx";
+			};
+			src5: src@5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+				dma-names = "rx", "tx";
+			};
+			src6: src@6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x91>, <&audma0 0xb4>;
+				dma-names = "rx", "tx";
+			};
+		};

I think this can't work correctly, because driver is assuming
DT has all channles (from 0). (see linux/sound/soc/sh/rcar/src.c :: rsnd_src_probe)
Can you adds dummy src0 with some comments ? or fix src.c driver ?

I would prefer the driver to be fixed (I had a similar patchset locally
and I found it doesn't work).

   You mean you had R8A7794 sound patch set too?

The reason is that DT should describe
the hardware rather than the current state of the software.

Yes, of course. Just tell me do I have to fix the driver *before* this patch set is accepted?

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux