On 04/12/15 09:12, Yendapally Reddy Dhananjaya Reddy wrote: > This enables the GPIO-a support for Broadcom NSP SoC > > Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yrdreddy@xxxxxxxxxxxx> Finally applied to devicetree/next, since there was a bit of restructuring with the addition of the ranges, please verify the results look correct here: https://github.com/Broadcom/stblinux/commit/018e4feb7584971b3dbda6daa6a8fef310cafbcb > --- > arch/arm/boot/dts/bcm-nsp.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi > index 58aca27..148d79e 100644 > --- a/arch/arm/boot/dts/bcm-nsp.dtsi > +++ b/arch/arm/boot/dts/bcm-nsp.dtsi > @@ -116,4 +116,16 @@ > status = "disabled"; > }; > }; > + > + gpioa: gpio@18000020 { > + compatible = "brcm,nsp-gpio-a"; > + reg = <0x18000020 0x70>, > + <0x1803f1c4 0x1c>; > + #gpio-cells = <2>; > + gpio-controller; > + ngpios = <32>; > + interrupt-controller; > + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; > + gpio-ranges = <&pinctrl 0 0 32>; > + }; > }; > -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
