Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and ethernet are wired up. Changes since v2: - Create a syscon binding for the system controller. - Clock patches split out to new patch series "clk: Add Artpec-6 SoC support". Changes since v1: - Corrected bindings for axis,artpec6-pll1-clock. - Moved the uart aliases to the board dts. - Kconfig cleanup. - Added a device tree binding for the dma configuration. - Added CONFIG_SYNOPSYS_DWC_ETH_QOS to multi_v7_defconfig. - Added binding documentation for axis,artpec6-dev-board. Lars Persson (6): arm: add device-tree SoC bindings for Axis Artpec-6 arm: dts: add Artpec-6 SoC dtsi file arm: dts: add Artpec-6 development board dts arm: initial machine port for artpec-6 SoC arm: multi_v7_defconfig: add MACH_ARTPEC6 arm: mach-artpec: add entry to MAINTAINERS Documentation/devicetree/bindings/arm/axis.txt | 29 +++ MAINTAINERS | 10 ++ arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/artpec6-devboard.dts | 64 +++++++ arch/arm/boot/dts/artpec6.dtsi | 236 +++++++++++++++++++++++++ arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/mach-artpec/Kconfig | 20 +++ arch/arm/mach-artpec/Makefile | 1 + arch/arm/mach-artpec/board-artpec6.c | 72 ++++++++ 11 files changed, 440 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/axis.txt create mode 100644 arch/arm/boot/dts/artpec6-devboard.dts create mode 100644 arch/arm/boot/dts/artpec6.dtsi create mode 100644 arch/arm/mach-artpec/Kconfig create mode 100644 arch/arm/mach-artpec/Makefile create mode 100644 arch/arm/mach-artpec/board-artpec6.c -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
