[PATCH v2 4/8] arm: dts: add Artpec-6 SoC dtsi file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Initial device tree for the Artpec-6 SoC.

Signed-off-by: Lars Persson <larper@xxxxxxxx>
---
 arch/arm/boot/dts/artpec6.dtsi | 236 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 236 insertions(+)
 create mode 100644 arch/arm/boot/dts/artpec6.dtsi

diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
new file mode 100644
index 0000000..8b28f72
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -0,0 +1,236 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "axis,artpec6";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&pl310>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&pl310>;
+		};
+	};
+
+	dmacfg {
+		compatible = "axis,artpec6-dmacfg";
+		reg = <0xf8000010 4>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		psci_version = <0x84000000>;
+		cpu_on = <0x84000003>;
+		system_reset = <0x84000009>;
+	};
+
+	scu@faf00000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfaf00000 0x58>;
+	};
+
+	/* Main external clock driving CPU and peripherals */
+	ext_clk: ext_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	/* PLL1 is used by CPU and some peripherals */
+	pll1_clk: pll1_clk@f8000000 {
+		#clock-cells = <0>;
+		compatible = "axis,artpec6-pll1-clock";
+		reg = <0xf8000000 4>;
+		clocks = <&ext_clk>;
+	};
+
+	cpu_clk: cpu_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&pll1_clk>;
+		clock-output-names = "cpu_clk";
+	};
+
+	cpu_clkdiv2: cpu_clkdiv2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&cpu_clk>;
+	};
+
+	cpu_clkdiv4: cpu_clkdiv4 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&cpu_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <8>;
+		clock-mult = <1>;
+		clocks = <&cpu_clk>;
+		clock-output-names = "apb_pclk";
+	};
+
+	/* PLL2 is used by a number of peripherals, including UDL */
+	pll2: pll2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <24>;
+		clocks = <&ext_clk>;
+	};
+
+	/* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */
+	pll2div2: pll2div2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&pll2>;
+	};
+
+	pll2div12: pll2div12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <12>;
+		clock-mult = <1>;
+		clocks = <&pll2>;
+	};
+
+	pll2div24: pll2div24 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&pll2>;
+		clock-output-names = "uart_clk";
+	};
+
+
+	gtimer@faf00200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfaf00200 0x20>;
+		interrupts = <GIC_PPI 11 0xf01>;
+		clocks = <&cpu_clkdiv2>;
+	};
+
+	timer@faf00600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xfaf00600 0x20>;
+		interrupts = <GIC_PPI 13 0xf04>;
+		clocks = <&cpu_clkdiv2>;
+		status = "disabled";
+	};
+
+	intc: interrupt-controller@faf01000 {
+		interrupt-controller;
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+	};
+
+	pl310: cache-controller@faf10000 {
+		compatible = "arm,pl310-cache";
+		cache-unified;
+		cache-level = <2>;
+		reg = <0xfaf10000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+		arm,filter-ranges = <0x0 0x80000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&intc>;
+	};
+
+	amba@0 {
+		compatible = "simple-bus";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		dma-ranges = <0x80000000 0x00000000 0x40000000>;
+		dma-coherent;
+
+		ethernet: ethernet@f8010000 {
+			clock-names = "phy_ref_clk", "apb_pclk";
+			clocks = <&ext_clk>, <&apb_pclk>;
+			compatible = "snps,dwc-qos-ethernet-4.10";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xf8010000 0x4000>;
+
+			snps,write-requests = <2>;
+			snps,read-requests = <16>;
+			snps,txpbl = <8>;
+			snps,rxpbl = <2>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@f8036000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8036000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@f8037000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8037000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@f8038000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8038000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart3: serial@f8039000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8039000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux