Re: [PATCH v5] mmc: OCTEON: Add host driver for OCTEON MMC controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/10/2016 09:36 AM, Matt Redfearn wrote:
From: Aleksey Makarov<aleksey.makarov@xxxxxxxxxxxxxxxxxx>

The OCTEON MMC controller is currently found on cn61XX and cnf71XX
devices.  Device parameters are configured from device tree data.

eMMC, MMC and SD devices are supported.

Tested-by: Aaro Koskinen<aaro.koskinen@xxxxxx>
Signed-off-by: Chandrakala Chavva<cchavva@xxxxxxxxxxxxxxxxxx>
Signed-off-by: David Daney<david.daney@xxxxxxxxxx>
Signed-off-by: Aleksey Makarov<aleksey.makarov@xxxxxxxxxx>
Signed-off-by: Leonid Rosenboim<lrosenboim@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Peter Swain<pswain@xxxxxxxxxx>
Signed-off-by: Aaron Williams<aaron.williams@xxxxxxxxxx>
Signed-off-by: Matt Redfearn<matt.redfearn@xxxxxxxxxx>
---
v5:
Incoroprate comments from review
http://patchwork.linux-mips.org/patch/9558/
- Use standard <bus-width> property instead of <cavium,bus-max-width>.
- Use standard <max-frequency> property instead of <spi-max-frequency>.
- Add octeon_mmc_of_parse_legacy function to deal with the above
   properties, since many devices have shipped with those properties
   embedded in firmware.
- Allow the <vmmc-supply> binding in addition to the legacy
   <gpios-power>.
- Remove the secondary driver for each slot.
- Use core gpio cd/wp handling

[...]

+static int octeon_mmc_of_copy_legacy_u32(struct device_node *node,
+					  const char *legacy_name,
+					  const char *new_name)
+{
+	u32 value;
+	int ret;
+
+	ret = of_property_read_u32(node, legacy_name, &value);
+	if (!ret) {
+		/* Found legacy - set generic property */
+		struct property *new_p;
+		u32 *new_v;
+
+		pr_warn(FW_WARN "%s: Legacy property '%s'. Please remove\n",
+			node->full_name, legacy_name);
+

I don't like this warning message.

The vast majority of people that see it will not be able to change their firmware. So it will be forever cluttering up their boot logs.

We are not ever planning on removing support for legacy firmware properties, so alarming people is really all this message does.

If you insist on a message then make it something like pr_info("This is working properly, but please consider using modern device tree properties...")

+		new_p = kzalloc(sizeof(*new_p), GFP_KERNEL);
+		new_v = kzalloc(sizeof(u32), GFP_KERNEL);
+		if (!new_p || !new_v)
+			return -ENOMEM;
+
+		*new_v = value;
+		new_p->name = kstrdup(new_name, GFP_KERNEL);
+		new_p->length = sizeof(u32);
+		new_p->value = new_v;
+
+		of_update_property(node, new_p);
+	}
+	return 0;
+}
+
+/*
+ * This function parses the legacy device tree that may be found in devices
+ * shipped before the driver was upstreamed. Future devices should not require
+ * it as standard bindings should be used
+ */
+static int octeon_mmc_of_parse_legacy(struct device *dev,
+				      struct device_node *node,
+				      struct octeon_mmc_slot *slot)
+{
+	int ret;
+
+	ret = octeon_mmc_of_copy_legacy_u32(node, "cavium,bus-max-width",
+					    "bus-width");
+	if (ret)
+		return ret;
+
+	ret = octeon_mmc_of_copy_legacy_u32(node, "spi-max-frequency",
+					    "max-frequency");
+	if (ret)
+		return ret;
+
+	slot->pwr_gpiod = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW);
+	if (!IS_ERR(slot->pwr_gpiod)) {
+		pr_warn(FW_WARN "%s: Legacy property '%s'. Please remove\n",
+			node->full_name, "gpios-power");
+	}
+
+	return 0;
+}
+

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux