On Fri, Feb 05, 2016 at 03:41:15PM -0800, David Daney wrote: > From: David Daney <david.daney@xxxxxxxxxx> > > The cavium,pci-thunder-ecam devices are exactly ECAM based PCI root > complexes. These root complexes (loosely referred to as ECAM units in > the hardware manuals) are used to access the Thunder on-chips devices. > They are special in that all the BARs on devices behind these root > complexes are at fixed addresses. To handle this in a manner > compatible with the core PCI code, we have the config access functions > synthesize Enhanced Allocation (EA) capability entries for each BAR. > > Since this EA synthesis is needed for exactly one chip model, we can > hard code some assumptions about the device topology and the > properties of specific DEVFNs in the driver. > > Signed-off-by: David Daney <david.daney@xxxxxxxxxx> > --- > .../devicetree/bindings/pci/pci-thunder-ecam.txt | 30 ++ > drivers/pci/host/Kconfig | 7 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pci-thunder-ecam.c | 358 +++++++++++++++++++++ > 4 files changed, 396 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt > create mode 100644 drivers/pci/host/pci-thunder-ecam.c > > diff --git a/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt b/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt > new file mode 100644 > index 0000000..34658f2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt > @@ -0,0 +1,30 @@ > +* ThunderX PCI host controller for pass-1.x silicon > + > +Firmware-initialized PCI host controller to on-chip devices found on > +some Cavium ThunderX processors. These devices have ECAM based config > +access, but the BARs are all at fixed addresses. We handle the fixed > +addresses by synthesizing Enhanced Allocation (EA) capabilities for > +these devices. > + > +The properties and their meanings are identical to those described in > +host-generic-pci.txt except as listed below. > + > +Properties of the host controller node that differ from > +host-generic-pci.txt: > + > +- compatible : Must be "cavium,pci-host-thunder-ecam" > + > +Example: > + > + pci@84b0,00000000 { Drop the comma, and the node name should be "pcie". Otherwise, Acked-by: Rob Herring <robh@xxxxxxxxxx> > + compatible = "cavium,pci-host-thunder-ecam"; > + device_type = "pci"; > + msi-parent = <&its>; > + msi-map = <0 &its 0x30000 0x10000>; > + bus-range = <0 31>; > + #size-cells = <2>; > + #address-cells = <3>; > + #stream-id-cells = <1>; > + reg = <0x84b0 0x00000000 0 0x02000000>; /* Configuration space */ > + ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */ > + }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html