On 5 February 2016 at 00:25, Mathieu Poirier <mathieu.poirier@xxxxxxxxxx> wrote:
> On 3 February 2016 at 10:18, <fu.wei@xxxxxxxxxx> wrote:
>> From: Fu Wei <fu.wei@xxxxxxxxxx>
>>
>> According to Server Base System Architecture (SBSA) specification,
>> the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0)
>> is for alerting the system by interrupt, the second one (WS1) is a real
>> hardware reset.
>>
>> This patch initially implements a simple single stage watchdog driver:
>> when the timeout is reached, your system will be reset by the second
>> signal (WS1).
>> The first signal (WS0) is ignored in this driver.
>>
>> This driver bases on linux kernel watchdog framework, so it can get
>> timeout from module parameter and FDT at the driver init stage.
>>
>> Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx>
>> Reviewed-by: Graeme Gregory <graeme.gregory@xxxxxxxxxx>
>> Tested-by: Pratyush Anand <panand@xxxxxxxxxx>
>> ---
>> drivers/watchdog/Kconfig | 17 +++
>> drivers/watchdog/Makefile | 1 +
>> drivers/watchdog/sbsa_gwdt.c | 322 +++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 340 insertions(+)
>>
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>> index 4f0e7be..4ab1b05 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -201,6 +201,23 @@ config ARM_SP805_WATCHDOG
>> ARM Primecell SP805 Watchdog timer. This will reboot your system when
>> the timeout is reached.
>>
>> +config ARM_SBSA_WATCHDOG
>> + tristate "ARM SBSA Generic Watchdog"
>> + depends on ARM64
>> + depends on ARM_ARCH_TIMER
>> + select WATCHDOG_CORE
>> + help
>> + ARM SBSA Generic Watchdog has two stage timeouts:
>> + the first signal (WS0) is for alerting the system by interrupt,
>> + the second one (WS1) is a real hardware reset.
>> + More details: ARM DEN0029B - Server Base System Architecture (SBSA)
>> +
>> + This is a simple single stage driver: when the timeout is reached,
>> + your system will be reset by WS1. The first signal (WS0) is ignored.
>> +
>> + To compile this driver as module, choose M here: The module
>> + will be called sbsa_gwdt.
>> +
>> config ASM9260_WATCHDOG
>> tristate "Alphascale ASM9260 watchdog"
>> depends on MACH_ASM9260
>> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
>> index f566753..f9826d4 100644
>> --- a/drivers/watchdog/Makefile
>> +++ b/drivers/watchdog/Makefile
>> @@ -30,6 +30,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
>>
>> # ARM Architecture
>> obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
>> +obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o
>> obj-$(CONFIG_ASM9260_WATCHDOG) += asm9260_wdt.o
>> obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
>> obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
>> diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c
>> new file mode 100644
>> index 0000000..5a2dba3
>> --- /dev/null
>> +++ b/drivers/watchdog/sbsa_gwdt.c
>> @@ -0,0 +1,322 @@
>> +/*
>> + * SBSA(Server Base System Architecture) Generic Watchdog driver
>> + *
>> + * Copyright (c) 2015, Linaro Ltd.
>> + * Author: Fu Wei <fu.wei@xxxxxxxxxx>
>> + * Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
>> + * Al Stone <al.stone@xxxxxxxxxx>
>> + * Timur Tabi <timur@xxxxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License 2 as published
>> + * by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * This SBSA Generic watchdog driver is a single stage timeout version.
>> + * Since this watchdog timer has two stages, and each stage is determined
>> + * by WOR. So the timeout is (WOR * 2).
>> + * When first timeout is reached, WS0 is triggered, the interrupt
>> + * triggered by WS0 will be ignored, then the second watch period starts;
>> + * when second timeout is reached, then WS1 is triggered, system reset.
>> + *
>> + * More details about the hardware specification of this device:
>> + * ARM DEN0029B - Server Base System Architecture (SBSA)
>> + *
>> + * SBSA GWDT: |--------WOR-------WS0--------WOR-------WS1
>> + * |----------------timeout----------------reset
>> + *
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/module.h>
>> +#include <linux/moduleparam.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/watchdog.h>
>> +#include <asm/arch_timer.h>
>> +
>> +/* SBSA Generic Watchdog register definitions */
>> +/* refresh frame */
>> +#define SBSA_GWDT_WRR 0x000
>> +
>> +/* control frame */
>> +#define SBSA_GWDT_WCS 0x000
>> +#define SBSA_GWDT_WOR 0x008
>> +#define SBSA_GWDT_WCV 0x010
>> +
>> +/* refresh/control frame */
>> +#define SBSA_GWDT_W_IIDR 0xfcc
>> +#define SBSA_GWDT_IDR 0xfd0
>> +
>> +/* Watchdog Control and Status Register */
>> +#define SBSA_GWDT_WCS_EN BIT(0)
>> +#define SBSA_GWDT_WCS_WS0 BIT(1)
>> +#define SBSA_GWDT_WCS_WS1 BIT(2)
>> +
>> +/**
>> + * struct sbsa_gwdt - Internal representation of the SBSA GWDT
>> + * @wdd: kernel watchdog_device structure
>> + * @clk: store the System Counter clock frequency, in Hz.
>> + * @refresh_base: Virtual address of the watchdog refresh frame
>> + * @control_base: Virtual address of the watchdog control frame
>> + */
>> +struct sbsa_gwdt {
>> + struct watchdog_device wdd;
>> + u32 clk;
>> + void __iomem *refresh_base;
>> + void __iomem *control_base;
>> +};
>> +
>> +#define to_sbsa_gwdt(e) container_of(e, struct sbsa_gwdt, wdd)
>> +
>> +#define DEFAULT_TIMEOUT 20 /* seconds, the 1st + 2nd watch periods*/
>> +
>> +static unsigned int timeout;
>> +module_param(timeout, uint, 0);
>> +MODULE_PARM_DESC(timeout,
>> + "Watchdog timeout in seconds. (>=0, default="
>> + __MODULE_STRING(DEFAULT_TIMEOUT) ")");
>> +
>> +static bool nowayout = WATCHDOG_NOWAYOUT;
>> +module_param(nowayout, bool, S_IRUGO);
>> +MODULE_PARM_DESC(nowayout,
>> + "Watchdog cannot be stopped once started (default="
>> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>> +
>> +/*
>> + * watchdog operation functions
>> + */
>> +static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd,
>> + unsigned int timeout)
>> +{
>> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
>> +
>> + wdd->timeout = timeout;
>> + writel(timeout / 2 * gwdt->clk, gwdt->control_base + SBSA_GWDT_WOR);
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd)
>> +{
>> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
>> + u64 timeleft = readq(gwdt->control_base + SBSA_GWDT_WCV) -
>> + arch_counter_get_cntvct();
>> +
>> + do_div(timeleft, gwdt->clk);
>> +
>> + if (readl(gwdt->control_base + SBSA_GWDT_WCS) & SBSA_GWDT_WCS_WS0)
>> + return timeleft;
>> +
>> + return timeleft + wdd->timeout / 2;
>
> It would be great to have a comment whenever hard coded values are
> used. That way people understand why things were set this way. The
> same applies for the rest of this patch.
OK, will do , thanks
>
>> +}
>> +
>> +static int sbsa_gwdt_keepalive(struct watchdog_device *wdd)
>> +{
>> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
>> +
>> + /*
>> + * Writing WRR for an explicit watchdog refresh.
>> + * You can write anyting(like 0xc0ffee).
>> + */
>> + writel(0xc0ffee, gwdt->refresh_base + SBSA_GWDT_WRR);
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned int sbsa_gwdt_status(struct watchdog_device *wdd)
>> +{
>> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
>> + u32 status = readl(gwdt->control_base + SBSA_GWDT_WCS);
>> +
>> + /* is the watchdog timer running? */
>> + return (status & SBSA_GWDT_WCS_EN) << WDOG_ACTIVE;
>> +}
>> +
>> +static int sbsa_gwdt_start(struct watchdog_device *wdd)
>> +{
>> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
>> +
>> + /* writing WCS will cause an explicit watchdog refresh */
>> + writel(SBSA_GWDT_WCS_EN, gwdt->control_base + SBSA_GWDT_WCS);
>> +
>> + return sbsa_gwdt_keepalive(wdd);
>> +}
>> +
>> +static int sbsa_gwdt_stop(struct watchdog_device *wdd)
>> +{
>> + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd);
>> +
>> + writel(0, gwdt->control_base + SBSA_GWDT_WCS);
>> +
>> + return 0;
>> +}
>> +
>> +static struct watchdog_info sbsa_gwdt_info = {
>> + .identity = "SBSA Generic Watchdog",
>> + .options = WDIOF_SETTIMEOUT |
>> + WDIOF_KEEPALIVEPING |
>> + WDIOF_MAGICCLOSE |
>> + WDIOF_CARDRESET,
>> +};
>> +
>> +static struct watchdog_ops sbsa_gwdt_ops = {
>> + .owner = THIS_MODULE,
>> + .start = sbsa_gwdt_start,
>> + .stop = sbsa_gwdt_stop,
>> + .status = sbsa_gwdt_status,
>> + .ping = sbsa_gwdt_keepalive,
>> + .set_timeout = sbsa_gwdt_set_timeout,
>> + .get_timeleft = sbsa_gwdt_get_timeleft,
>> +};
>> +
>> +static int sbsa_gwdt_probe(struct platform_device *pdev)
>> +{
>> + void __iomem *rf_base, *cf_base;
>> + struct device *dev = &pdev->dev;
>> + struct watchdog_device *wdd;
>> + struct sbsa_gwdt *gwdt;
>> + struct resource *res;
>> + u32 status;
>> + int ret;
>> +
>> + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
>> + if (!gwdt)
>> + return -ENOMEM;
>> + platform_set_drvdata(pdev, gwdt);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + cf_base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(cf_base))
>> + return PTR_ERR(cf_base);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> + rf_base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(rf_base))
>> + return PTR_ERR(rf_base);
>> +
>> + /*
>> + * Get the frequency of system counter from the cp15 interface of ARM
>> + * Generic timer. We don't need to check it, because if it returns "0",
>> + * system would panic in very early stage.
>> + */
>> + gwdt->clk = arch_timer_get_cntfrq();
>> + gwdt->refresh_base = rf_base;
>> + gwdt->control_base = cf_base;
>> +
>> + wdd = &gwdt->wdd;
>> + wdd->parent = dev;
>> + wdd->info = &sbsa_gwdt_info;
>> + wdd->ops = &sbsa_gwdt_ops;
>> + watchdog_set_drvdata(wdd, gwdt);
>> + watchdog_set_nowayout(wdd, nowayout);
>> +
>> + wdd->min_timeout = 2;
>> + wdd->max_timeout = U32_MAX / gwdt->clk * 2;
>> + wdd->timeout = DEFAULT_TIMEOUT;
>> + watchdog_init_timeout(wdd, timeout, dev);
>> +
>> + status = readl(gwdt->control_base + SBSA_GWDT_WCS);
>> + if (status & SBSA_GWDT_WCS_WS1) {
>> + dev_warn(dev, "System reset by WDT.\n");
>> + wdd->bootstatus |= WDIOF_CARDRESET;
>> + }
>> +
>> + ret = watchdog_register_device(wdd);
>> + if (ret)
>> + return ret;
>> +
>> + /*
>> + * Update timeout to WOR.
>> + * Because of the explicit watchdog refresh mechanism,
>> + * it's also a ping, if watchdog is enabled.
>> + */
>> + sbsa_gwdt_set_timeout(wdd, wdd->timeout);
>> +
>> + dev_info(dev, "Initialized with %ds timeout @ %u Hz%s\n", wdd->timeout,
>> + gwdt->clk, status & SBSA_GWDT_WCS_EN ? " [enabled]" : "");
>> +
>> + return 0;
>> +}
>> +
>> +static void sbsa_gwdt_shutdown(struct platform_device *pdev)
>> +{
>> + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
>> +
>> + sbsa_gwdt_stop(&gwdt->wdd);
>> +}
>> +
>> +static int sbsa_gwdt_remove(struct platform_device *pdev)
>> +{
>> + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
>> +
>> + watchdog_unregister_device(&gwdt->wdd);
>> +
>> + return 0;
>> +}
>> +
>> +/* Disable watchdog if it is active during suspend */
>> +static int __maybe_unused sbsa_gwdt_suspend(struct device *dev)
>> +{
>> + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
>> +
>> + if (watchdog_active(&gwdt->wdd))
>> + sbsa_gwdt_stop(&gwdt->wdd);
>> +
>> + return 0;
>> +}
>> +
>> +/* Enable watchdog and configure it if necessary */
>> +static int __maybe_unused sbsa_gwdt_resume(struct device *dev)
>> +{
>> + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
>> +
>> + if (watchdog_active(&gwdt->wdd))
>> + sbsa_gwdt_start(&gwdt->wdd);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dev_pm_ops sbsa_gwdt_pm_ops = {
>> + SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume)
>> +};
>> +
>> +static const struct of_device_id sbsa_gwdt_of_match[] = {
>> + { .compatible = "arm,sbsa-gwdt", },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match);
>> +
>> +static const struct platform_device_id sbsa_gwdt_pdev_match[] = {
>> + { .name = "sbsa-gwdt", },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match);
>> +
>> +static struct platform_driver sbsa_gwdt_driver = {
>> + .driver = {
>> + .name = "sbsa-gwdt",
>> + .pm = &sbsa_gwdt_pm_ops,
>> + .of_match_table = sbsa_gwdt_of_match,
>> + },
>> + .probe = sbsa_gwdt_probe,
>> + .remove = sbsa_gwdt_remove,
>> + .shutdown = sbsa_gwdt_shutdown,
>> + .id_table = sbsa_gwdt_pdev_match,
>> +};
>> +
>> +module_platform_driver(sbsa_gwdt_driver);
>> +
>> +MODULE_DESCRIPTION("SBSA Generic Watchdog Driver");
>> +MODULE_AUTHOR("Fu Wei <fu.wei@xxxxxxxxxx>");
>> +MODULE_AUTHOR("Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>");
>> +MODULE_AUTHOR("Al Stone <al.stone@xxxxxxxxxx>");
>> +MODULE_AUTHOR("Timur Tabi <timur@xxxxxxxxxxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.5.0
>>
--
Best regards,
Fu Wei
Software Engineer
Red Hat Software (Beijing) Co.,Ltd.Shanghai Branch
Ph: +86 21 61221326(direct)
Ph: +86 186 2020 4684 (mobile)
Room 1512, Regus One Corporate Avenue,Level 15,
One Corporate Avenue,222 Hubin Road,Huangpu District,
Shanghai,China 200021
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
