From: Fu Wei <fu.wei@xxxxxxxxxx> According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. This patch initially implements a simple single stage watchdog driver: when the timeout is reached, your system will be reset by the second signal (WS1). The first signal (WS0) is ignored in this driver. This driver bases on linux kernel watchdog framework, so it can get timeout from module parameter and FDT at the driver init stage. Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx> Reviewed-by: Graeme Gregory <graeme.gregory@xxxxxxxxxx> Tested-by: Pratyush Anand <panand@xxxxxxxxxx> --- drivers/watchdog/Kconfig | 17 +++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 322 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 340 insertions(+) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 4f0e7be..4ab1b05 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -201,6 +201,23 @@ config ARM_SP805_WATCHDOG ARM Primecell SP805 Watchdog timer. This will reboot your system when the timeout is reached. +config ARM_SBSA_WATCHDOG + tristate "ARM SBSA Generic Watchdog" + depends on ARM64 + depends on ARM_ARCH_TIMER + select WATCHDOG_CORE + help + ARM SBSA Generic Watchdog has two stage timeouts: + the first signal (WS0) is for alerting the system by interrupt, + the second one (WS1) is a real hardware reset. + More details: ARM DEN0029B - Server Base System Architecture (SBSA) + + This is a simple single stage driver: when the timeout is reached, + your system will be reset by WS1. The first signal (WS0) is ignored. + + To compile this driver as module, choose M here: The module + will be called sbsa_gwdt. + config ASM9260_WATCHDOG tristate "Alphascale ASM9260 watchdog" depends on MACH_ASM9260 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index f566753..f9826d4 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o # ARM Architecture obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o +obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o obj-$(CONFIG_ASM9260_WATCHDOG) += asm9260_wdt.o obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c new file mode 100644 index 0000000..5a2dba3 --- /dev/null +++ b/drivers/watchdog/sbsa_gwdt.c @@ -0,0 +1,322 @@ +/* + * SBSA(Server Base System Architecture) Generic Watchdog driver + * + * Copyright (c) 2015, Linaro Ltd. + * Author: Fu Wei <fu.wei@xxxxxxxxxx> + * Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx> + * Al Stone <al.stone@xxxxxxxxxx> + * Timur Tabi <timur@xxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This SBSA Generic watchdog driver is a single stage timeout version. + * Since this watchdog timer has two stages, and each stage is determined + * by WOR. So the timeout is (WOR * 2). + * When first timeout is reached, WS0 is triggered, the interrupt + * triggered by WS0 will be ignored, then the second watch period starts; + * when second timeout is reached, then WS1 is triggered, system reset. + * + * More details about the hardware specification of this device: + * ARM DEN0029B - Server Base System Architecture (SBSA) + * + * SBSA GWDT: |--------WOR-------WS0--------WOR-------WS1 + * |----------------timeout----------------reset + * + */ + +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/watchdog.h> +#include <asm/arch_timer.h> + +/* SBSA Generic Watchdog register definitions */ +/* refresh frame */ +#define SBSA_GWDT_WRR 0x000 + +/* control frame */ +#define SBSA_GWDT_WCS 0x000 +#define SBSA_GWDT_WOR 0x008 +#define SBSA_GWDT_WCV 0x010 + +/* refresh/control frame */ +#define SBSA_GWDT_W_IIDR 0xfcc +#define SBSA_GWDT_IDR 0xfd0 + +/* Watchdog Control and Status Register */ +#define SBSA_GWDT_WCS_EN BIT(0) +#define SBSA_GWDT_WCS_WS0 BIT(1) +#define SBSA_GWDT_WCS_WS1 BIT(2) + +/** + * struct sbsa_gwdt - Internal representation of the SBSA GWDT + * @wdd: kernel watchdog_device structure + * @clk: store the System Counter clock frequency, in Hz. + * @refresh_base: Virtual address of the watchdog refresh frame + * @control_base: Virtual address of the watchdog control frame + */ +struct sbsa_gwdt { + struct watchdog_device wdd; + u32 clk; + void __iomem *refresh_base; + void __iomem *control_base; +}; + +#define to_sbsa_gwdt(e) container_of(e, struct sbsa_gwdt, wdd) + +#define DEFAULT_TIMEOUT 20 /* seconds, the 1st + 2nd watch periods*/ + +static unsigned int timeout; +module_param(timeout, uint, 0); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (>=0, default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, S_IRUGO); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +/* + * watchdog operation functions + */ +static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd, + unsigned int timeout) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + wdd->timeout = timeout; + writel(timeout / 2 * gwdt->clk, gwdt->control_base + SBSA_GWDT_WOR); + + return 0; +} + +static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + u64 timeleft = readq(gwdt->control_base + SBSA_GWDT_WCV) - + arch_counter_get_cntvct(); + + do_div(timeleft, gwdt->clk); + + if (readl(gwdt->control_base + SBSA_GWDT_WCS) & SBSA_GWDT_WCS_WS0) + return timeleft; + + return timeleft + wdd->timeout / 2; +} + +static int sbsa_gwdt_keepalive(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + /* + * Writing WRR for an explicit watchdog refresh. + * You can write anyting(like 0xc0ffee). + */ + writel(0xc0ffee, gwdt->refresh_base + SBSA_GWDT_WRR); + + return 0; +} + +static unsigned int sbsa_gwdt_status(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + u32 status = readl(gwdt->control_base + SBSA_GWDT_WCS); + + /* is the watchdog timer running? */ + return (status & SBSA_GWDT_WCS_EN) << WDOG_ACTIVE; +} + +static int sbsa_gwdt_start(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + /* writing WCS will cause an explicit watchdog refresh */ + writel(SBSA_GWDT_WCS_EN, gwdt->control_base + SBSA_GWDT_WCS); + + return sbsa_gwdt_keepalive(wdd); +} + +static int sbsa_gwdt_stop(struct watchdog_device *wdd) +{ + struct sbsa_gwdt *gwdt = to_sbsa_gwdt(wdd); + + writel(0, gwdt->control_base + SBSA_GWDT_WCS); + + return 0; +} + +static struct watchdog_info sbsa_gwdt_info = { + .identity = "SBSA Generic Watchdog", + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | + WDIOF_CARDRESET, +}; + +static struct watchdog_ops sbsa_gwdt_ops = { + .owner = THIS_MODULE, + .start = sbsa_gwdt_start, + .stop = sbsa_gwdt_stop, + .status = sbsa_gwdt_status, + .ping = sbsa_gwdt_keepalive, + .set_timeout = sbsa_gwdt_set_timeout, + .get_timeleft = sbsa_gwdt_get_timeleft, +}; + +static int sbsa_gwdt_probe(struct platform_device *pdev) +{ + void __iomem *rf_base, *cf_base; + struct device *dev = &pdev->dev; + struct watchdog_device *wdd; + struct sbsa_gwdt *gwdt; + struct resource *res; + u32 status; + int ret; + + gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL); + if (!gwdt) + return -ENOMEM; + platform_set_drvdata(pdev, gwdt); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cf_base = devm_ioremap_resource(dev, res); + if (IS_ERR(cf_base)) + return PTR_ERR(cf_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + rf_base = devm_ioremap_resource(dev, res); + if (IS_ERR(rf_base)) + return PTR_ERR(rf_base); + + /* + * Get the frequency of system counter from the cp15 interface of ARM + * Generic timer. We don't need to check it, because if it returns "0", + * system would panic in very early stage. + */ + gwdt->clk = arch_timer_get_cntfrq(); + gwdt->refresh_base = rf_base; + gwdt->control_base = cf_base; + + wdd = &gwdt->wdd; + wdd->parent = dev; + wdd->info = &sbsa_gwdt_info; + wdd->ops = &sbsa_gwdt_ops; + watchdog_set_drvdata(wdd, gwdt); + watchdog_set_nowayout(wdd, nowayout); + + wdd->min_timeout = 2; + wdd->max_timeout = U32_MAX / gwdt->clk * 2; + wdd->timeout = DEFAULT_TIMEOUT; + watchdog_init_timeout(wdd, timeout, dev); + + status = readl(gwdt->control_base + SBSA_GWDT_WCS); + if (status & SBSA_GWDT_WCS_WS1) { + dev_warn(dev, "System reset by WDT.\n"); + wdd->bootstatus |= WDIOF_CARDRESET; + } + + ret = watchdog_register_device(wdd); + if (ret) + return ret; + + /* + * Update timeout to WOR. + * Because of the explicit watchdog refresh mechanism, + * it's also a ping, if watchdog is enabled. + */ + sbsa_gwdt_set_timeout(wdd, wdd->timeout); + + dev_info(dev, "Initialized with %ds timeout @ %u Hz%s\n", wdd->timeout, + gwdt->clk, status & SBSA_GWDT_WCS_EN ? " [enabled]" : ""); + + return 0; +} + +static void sbsa_gwdt_shutdown(struct platform_device *pdev) +{ + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev); + + sbsa_gwdt_stop(&gwdt->wdd); +} + +static int sbsa_gwdt_remove(struct platform_device *pdev) +{ + struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev); + + watchdog_unregister_device(&gwdt->wdd); + + return 0; +} + +/* Disable watchdog if it is active during suspend */ +static int __maybe_unused sbsa_gwdt_suspend(struct device *dev) +{ + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev); + + if (watchdog_active(&gwdt->wdd)) + sbsa_gwdt_stop(&gwdt->wdd); + + return 0; +} + +/* Enable watchdog and configure it if necessary */ +static int __maybe_unused sbsa_gwdt_resume(struct device *dev) +{ + struct sbsa_gwdt *gwdt = dev_get_drvdata(dev); + + if (watchdog_active(&gwdt->wdd)) + sbsa_gwdt_start(&gwdt->wdd); + + return 0; +} + +static const struct dev_pm_ops sbsa_gwdt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume) +}; + +static const struct of_device_id sbsa_gwdt_of_match[] = { + { .compatible = "arm,sbsa-gwdt", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match); + +static const struct platform_device_id sbsa_gwdt_pdev_match[] = { + { .name = "sbsa-gwdt", }, + {}, +}; +MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match); + +static struct platform_driver sbsa_gwdt_driver = { + .driver = { + .name = "sbsa-gwdt", + .pm = &sbsa_gwdt_pm_ops, + .of_match_table = sbsa_gwdt_of_match, + }, + .probe = sbsa_gwdt_probe, + .remove = sbsa_gwdt_remove, + .shutdown = sbsa_gwdt_shutdown, + .id_table = sbsa_gwdt_pdev_match, +}; + +module_platform_driver(sbsa_gwdt_driver); + +MODULE_DESCRIPTION("SBSA Generic Watchdog Driver"); +MODULE_AUTHOR("Fu Wei <fu.wei@xxxxxxxxxx>"); +MODULE_AUTHOR("Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>"); +MODULE_AUTHOR("Al Stone <al.stone@xxxxxxxxxx>"); +MODULE_AUTHOR("Timur Tabi <timur@xxxxxxxxxxxxxx>"); +MODULE_LICENSE("GPL v2"); -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html