On 8 November 2013 16:50, Sachin Kamat <sachin.kamat@xxxxxxxxxx> wrote: > On 8 November 2013 15:58, Lee Jones <lee.jones@xxxxxxxxxx> wrote: >> As this is only a trivial patch, I'll take it out the hands of the >> already overloaded DT maintainers. >> >>> Fixed trivial typos to improve readability. >>> >>> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx> >>> --- >>> Documentation/devicetree/bindings/mfd/s2mps11.txt | 9 +++++---- >>> 1 file changed, 5 insertions(+), 4 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt >>> index c9332c6..0ff4e65 100644 >>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt >>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt >>> @@ -1,10 +1,10 @@ >>> >>> * Samsung S2MPS11 Voltage and Current Regulator >>> >>> -The Samsung S2MP211 is a multi-function device which includes voltage and >>> +The Samsung S2MPS11 is a multi-function device which includes voltage and >> >> Nice catch eagle-eye! > > :) > >> >>> current regulators, RTC, charger controller and other sub-blocks. It is >>> -interfaced to the host controller using a I2C interface. Each sub-block is >>> -addressed by the host system using different I2C slave address. >>> +interfaced to the host controller using an I2C interface. Each sub-block is >>> +addressed by the host system using different I2C slave addresses. >>> >>> Required properties: >>> - compatible: Should be "samsung,s2mps11-pmic". >>> @@ -43,7 +43,8 @@ sub-node should be of the format as listed below. >>> >>> BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly >>> regulator-ramp-delay = <0> can be used for them to disable ramp delay. >>> - In absence of regulator-ramp-delay property, default ramp delay will be used. >>> + In the absence of regulator-ramp-delay property, default ramp delay will >>> + be used. >> >> So if we're being pertinacity here, your correction isn't much better. >> >> s/of regulator-ramp-delay property,/of {the,an} regulator-ramp-delay property, the > > I like this one :) >> >> or >> >> s/of regulator-ramp-delay property,/of regulator-ramp-delay, the > Resent this patch with the above suggested changes and some more updates and hence with a modified subject line (Documentation/mfd: Update s2mps11.txt). -- With warm regards, Sachin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html