On 8 November 2013 15:58, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> As this is only a trivial patch, I'll take it out the hands of the
> already overloaded DT maintainers.
>
>> Fixed trivial typos to improve readability.
>>
>> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
>> ---
>> Documentation/devicetree/bindings/mfd/s2mps11.txt | 9 +++++----
>> 1 file changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> index c9332c6..0ff4e65 100644
>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> @@ -1,10 +1,10 @@
>>
>> * Samsung S2MPS11 Voltage and Current Regulator
>>
>> -The Samsung S2MP211 is a multi-function device which includes voltage and
>> +The Samsung S2MPS11 is a multi-function device which includes voltage and
>
> Nice catch eagle-eye!
:)
>
>> current regulators, RTC, charger controller and other sub-blocks. It is
>> -interfaced to the host controller using a I2C interface. Each sub-block is
>> -addressed by the host system using different I2C slave address.
>> +interfaced to the host controller using an I2C interface. Each sub-block is
>> +addressed by the host system using different I2C slave addresses.
>>
>> Required properties:
>> - compatible: Should be "samsung,s2mps11-pmic".
>> @@ -43,7 +43,8 @@ sub-node should be of the format as listed below.
>>
>> BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
>> regulator-ramp-delay = <0> can be used for them to disable ramp delay.
>> - In absence of regulator-ramp-delay property, default ramp delay will be used.
>> + In the absence of regulator-ramp-delay property, default ramp delay will
>> + be used.
>
> So if we're being pertinacity here, your correction isn't much better.
>
> s/of regulator-ramp-delay property,/of {the,an} regulator-ramp-delay property, the
I like this one :)
>
> or
>
> s/of regulator-ramp-delay property,/of regulator-ramp-delay, the
--
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
