On 02/02/2016 11:24 AM, Uwe Kleine-König wrote: > This is a preparation for the next patche. There is no change in > behaviour intended. This one looks good to me, but it clashes with Dmitry's latest patch sets (which I haven't found the time to test yet, sorry!). > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Acked-by: Daniel Mack <daniel@xxxxxxxxxx> Thanks, Daniel > --- > drivers/input/misc/rotary_encoder.c | 166 ++++++++++++++++++++---------------- > 1 file changed, 94 insertions(+), 72 deletions(-) > > diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c > index 386bdb5314e6..0582e851993f 100644 > --- a/drivers/input/misc/rotary_encoder.c > +++ b/drivers/input/misc/rotary_encoder.c > @@ -32,58 +32,65 @@ > > struct rotary_encoder { > struct input_dev *input; > - const struct rotary_encoder_platform_data *pdata; > > + /* configuration */ > + unsigned int steps; > unsigned int axis; > - unsigned int pos; > + unsigned int gpio_a; > + unsigned int gpio_b; > + unsigned int inverted_a; > + unsigned int inverted_b; > + unsigned int steps_per_period; > + bool relative_axis; > + bool rollover; > + bool wakeup_source; > > unsigned int irq_a; > unsigned int irq_b; > > + /* state */ > + unsigned int pos; > bool armed; > unsigned char dir; /* 0 - clockwise, 1 - CCW */ > - > char last_stable; > }; > > -static int rotary_encoder_get_state(const struct rotary_encoder_platform_data *pdata) > +static int rotary_encoder_get_state(const struct rotary_encoder *encoder) > { > - int a = !!gpio_get_value(pdata->gpio_a); > - int b = !!gpio_get_value(pdata->gpio_b); > + int a = !!gpio_get_value(encoder->gpio_a); > + int b = !!gpio_get_value(encoder->gpio_b); > > - a ^= pdata->inverted_a; > - b ^= pdata->inverted_b; > + a ^= encoder->inverted_a; > + b ^= encoder->inverted_b; > > return ((a << 1) | b); > } > > static void rotary_encoder_report_event(struct rotary_encoder *encoder) > { > - const struct rotary_encoder_platform_data *pdata = encoder->pdata; > - > - if (pdata->relative_axis) { > + if (encoder->relative_axis) { > input_report_rel(encoder->input, > - pdata->axis, encoder->dir ? -1 : 1); > + encoder->axis, encoder->dir ? -1 : 1); > } else { > unsigned int pos = encoder->pos; > > if (encoder->dir) { > /* turning counter-clockwise */ > - if (pdata->rollover) > - pos += pdata->steps; > + if (encoder->rollover) > + pos += encoder->steps; > if (pos) > pos--; > } else { > /* turning clockwise */ > - if (pdata->rollover || pos < pdata->steps) > + if (encoder->rollover || pos < encoder->steps) > pos++; > } > > - if (pdata->rollover) > - pos %= pdata->steps; > + if (encoder->rollover) > + pos %= encoder->steps; > > encoder->pos = pos; > - input_report_abs(encoder->input, pdata->axis, encoder->pos); > + input_report_abs(encoder->input, encoder->axis, encoder->pos); > } > > input_sync(encoder->input); > @@ -94,7 +101,7 @@ static irqreturn_t rotary_encoder_irq(int irq, void *dev_id) > struct rotary_encoder *encoder = dev_id; > int state; > > - state = rotary_encoder_get_state(encoder->pdata); > + state = rotary_encoder_get_state(encoder); > > switch (state) { > case 0x0: > @@ -123,7 +130,7 @@ static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id) > struct rotary_encoder *encoder = dev_id; > int state; > > - state = rotary_encoder_get_state(encoder->pdata); > + state = rotary_encoder_get_state(encoder); > > switch (state) { > case 0x00: > @@ -149,7 +156,7 @@ static irqreturn_t rotary_encoder_quarter_period_irq(int irq, void *dev_id) > unsigned char sum; > int state; > > - state = rotary_encoder_get_state(encoder->pdata); > + state = rotary_encoder_get_state(encoder); > > /* > * We encode the previous and the current state using a byte. > @@ -199,38 +206,34 @@ static const struct of_device_id rotary_encoder_of_match[] = { > }; > MODULE_DEVICE_TABLE(of, rotary_encoder_of_match); > > -static struct rotary_encoder_platform_data *rotary_encoder_parse_dt(struct device *dev) > +static int rotary_encoder_parse_dt(struct device *dev, > + struct rotary_encoder *encoder) > { > const struct of_device_id *of_id = > of_match_device(rotary_encoder_of_match, dev); > struct device_node *np = dev->of_node; > - struct rotary_encoder_platform_data *pdata; > enum of_gpio_flags flags; > int error; > > if (!of_id || !np) > - return NULL; > - > - pdata = devm_kzalloc(dev, sizeof(struct rotary_encoder_platform_data), > - GFP_KERNEL); > - if (!pdata) > - return ERR_PTR(-ENOMEM); > + return 1; > > - of_property_read_u32(np, "rotary-encoder,steps", &pdata->steps); > - of_property_read_u32(np, "linux,axis", &pdata->axis); > + of_property_read_u32(np, "rotary-encoder,steps", &encoder->steps); > + of_property_read_u32(np, "linux,axis", &encoder->axis); > > - pdata->gpio_a = of_get_gpio_flags(np, 0, &flags); > - pdata->inverted_a = flags & OF_GPIO_ACTIVE_LOW; > + encoder->gpio_a = of_get_gpio_flags(np, 0, &flags); > + encoder->inverted_a = flags & OF_GPIO_ACTIVE_LOW; > > - pdata->gpio_b = of_get_gpio_flags(np, 1, &flags); > - pdata->inverted_b = flags & OF_GPIO_ACTIVE_LOW; > + encoder->gpio_b = of_get_gpio_flags(np, 1, &flags); > + encoder->inverted_b = flags & OF_GPIO_ACTIVE_LOW; > > - pdata->relative_axis = > + encoder->relative_axis = > of_property_read_bool(np, "rotary-encoder,relative-axis"); > - pdata->rollover = of_property_read_bool(np, "rotary-encoder,rollover"); > + encoder->rollover = > + of_property_read_bool(np, "rotary-encoder,rollover"); > > error = of_property_read_u32(np, "rotary-encoder,steps-per-period", > - &pdata->steps_per_period); > + &encoder->steps_per_period); > if (error) { > /* > * The 'half-period' property has been deprecated, you must use > @@ -238,45 +241,57 @@ static struct rotary_encoder_platform_data *rotary_encoder_parse_dt(struct devic > * need to parse it to maintain compatibility. > */ > if (of_property_read_bool(np, "rotary-encoder,half-period")) { > - pdata->steps_per_period = 2; > + encoder->steps_per_period = 2; > } else { > /* Fallback to one step per period behavior */ > - pdata->steps_per_period = 1; > + encoder->steps_per_period = 1; > } > } > > - pdata->wakeup_source = of_property_read_bool(np, "wakeup-source"); > + encoder->wakeup_source = of_property_read_bool(np, "wakeup-source"); > > - return pdata; > + return 0; > } > #else > -static inline struct rotary_encoder_platform_data * > -rotary_encoder_parse_dt(struct device *dev) > +static inline int rotary_encoder_parse_dt(struct device *dev, > + struct rotary_encoder *encoder) > { > - return NULL; > + return 1; > } > #endif > > +static int rotary_encoder_parse_pdata(struct device *dev, > + struct rotary_encoder *encoder) > +{ > + const struct rotary_encoder_platform_data *pdata; > + > + pdata = dev_get_platdata(dev); > + if (!pdata) { > + dev_err(dev, "missing platform data\n"); > + return -EINVAL; > + } > + > + encoder->steps = pdata->steps; > + encoder->axis = pdata->axis; > + encoder->gpio_a = pdata->gpio_a; > + encoder->gpio_b = pdata->gpio_b; > + encoder->inverted_a = pdata->inverted_a; > + encoder->inverted_b = pdata->inverted_b; > + encoder->steps_per_period = pdata->steps_per_period; > + encoder->relative_axis = pdata->relative_axis; > + encoder->rollover = pdata->rollover; > + > + return 0; > +} > + > static int rotary_encoder_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > - const struct rotary_encoder_platform_data *pdata = dev_get_platdata(dev); > struct rotary_encoder *encoder; > struct input_dev *input; > irq_handler_t handler; > int err; > > - if (!pdata) { > - pdata = rotary_encoder_parse_dt(dev); > - if (IS_ERR(pdata)) > - return PTR_ERR(pdata); > - > - if (!pdata) { > - dev_err(dev, "missing platform data\n"); > - return -EINVAL; > - } > - } > - > encoder = devm_kzalloc(dev, sizeof(struct rotary_encoder), GFP_KERNEL); > input = devm_input_allocate_device(&pdev->dev); > if (!encoder || !input) { > @@ -284,55 +299,62 @@ static int rotary_encoder_probe(struct platform_device *pdev) > return -ENOMEM; > } > > + err = rotary_encoder_parse_dt(dev, encoder); > + if (err > 0) > + /* not instatiated by dt */ > + err = rotary_encoder_parse_pdata(dev, encoder); > + > + if (err < 0) > + return err; > + > encoder->input = input; > - encoder->pdata = pdata; > > input->name = pdev->name; > input->id.bustype = BUS_HOST; > input->dev.parent = dev; > > - if (pdata->relative_axis) { > + if (encoder->relative_axis) { > input->evbit[0] = BIT_MASK(EV_REL); > - input->relbit[0] = BIT_MASK(pdata->axis); > + input->relbit[0] = BIT_MASK(encoder->axis); > } else { > input->evbit[0] = BIT_MASK(EV_ABS); > input_set_abs_params(encoder->input, > - pdata->axis, 0, pdata->steps, 0, 1); > + encoder->axis, 0, encoder->steps, 0, 1); > } > > /* request the GPIOs */ > - err = devm_gpio_request_one(dev, pdata->gpio_a, > + err = devm_gpio_request_one(dev, encoder->gpio_a, > GPIOF_IN, dev_name(dev)); > if (err) { > - dev_err(dev, "unable to request GPIO %d\n", pdata->gpio_a); > + dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_a); > return err; > } > > - err = devm_gpio_request_one(dev, pdata->gpio_b, > + err = devm_gpio_request_one(dev, encoder->gpio_b, > GPIOF_IN, dev_name(dev)); > if (err) { > - dev_err(dev, "unable to request GPIO %d\n", pdata->gpio_b); > + dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_b); > return err; > } > > - encoder->irq_a = gpio_to_irq(pdata->gpio_a); > - encoder->irq_b = gpio_to_irq(pdata->gpio_b); > + encoder->irq_a = gpio_to_irq(encoder->gpio_a); > + encoder->irq_b = gpio_to_irq(encoder->gpio_b); > > - switch (pdata->steps_per_period) { > + switch (encoder->steps_per_period) { > case 4: > handler = &rotary_encoder_quarter_period_irq; > - encoder->last_stable = rotary_encoder_get_state(pdata); > + encoder->last_stable = rotary_encoder_get_state(encoder); > break; > case 2: > handler = &rotary_encoder_half_period_irq; > - encoder->last_stable = rotary_encoder_get_state(pdata); > + encoder->last_stable = rotary_encoder_get_state(encoder); > break; > case 1: > handler = &rotary_encoder_irq; > break; > default: > dev_err(dev, "'%d' is not a valid steps-per-period value\n", > - pdata->steps_per_period); > + encoder->steps_per_period); > return -EINVAL; > } > > @@ -358,7 +380,7 @@ static int rotary_encoder_probe(struct platform_device *pdev) > return err; > } > > - device_init_wakeup(&pdev->dev, pdata->wakeup_source); > + device_init_wakeup(&pdev->dev, encoder->wakeup_source); > > platform_set_drvdata(pdev, encoder); > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html