On Thu, Jan 28, 2016 at 04:33:48PM +0000, Jon Hunter wrote: > Add power-domain binding documentation for the NVIDIA PMC driver in > order to support generic power-domains. > > Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx> > --- > .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 55 ++++++++++++++++++++++ > 1 file changed, 55 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt > index 53aa5496c5cf..3c77373aa826 100644 > --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt > +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt > @@ -1,5 +1,7 @@ > NVIDIA Tegra Power Management Controller (PMC) > > +== Power Management Controller Node == > + > The PMC block interacts with an external Power Management Unit. The PMC > mostly controls the entry and exit of the system from different sleep > modes. It provides power-gating controllers for SoC and CPU power-islands. > @@ -70,6 +72,10 @@ Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip' > Defaults to 0. Valid values are described in section 12.5.2 > "Pinmux Support" of the Tegra4 Technical Reference Manual. > > +Optional nodes: > +- powergates : This node contains a hierarchy of power domain nodes, which > + should match the powergates on the Tegra SoC. > + > Example: > > / SoC dts including file > @@ -115,3 +121,52 @@ pmc@7000f400 { > }; > ... > }; > + > + > +== PM Domain Nodes == > + > +Each of the PM domain nodes represents a power-domain on the Tegra SoC > +that can be power-gated by the PMC and should be named appropriately. > + > +Required properties: > + - clocks: Must contain an entry for each clock required by the PMC for > + controlling a power-gate. See ../clocks/clock-bindings.txt for details. > + - resets: Must contain an entry for each reset required by the PMC for > + controlling a power-gate. See ../reset/reset.txt for details. > + - nvidia,powergate: Integer cell that contains an identifier for the PMC > + power-gate that is associated with the power-domain. Please refer to > + the Tegra TRM for more details. Why not make this value be the power-domain cell for consumers and the pmc be the phandle. Then use reg property for the subnodes. That avoids a custom property. > + - #power-domain-cells: Must be 0. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html