Signed-off-by: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
---
Changes since v4:
- Added description, required properties
- Tested and added support for gpio polarity
- Added vendor prefix to compatible flags
Changes since v3:
- Added gpio-controller and gpio cells flags
.../devicetree/bindings/gpio/gpio-sn65hvs885.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt
new file mode 100644
index 0000000..c9b3592
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-sn65hvs885.txt
@@ -0,0 +1,20 @@
+* TI SN65HVS885 digital-input serializer
+
+Required properties:
+- compatible : Should be "ti,sn65hvs885"
+- reg : chip select number
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity:
+ 0 = active high
+ 1 = active low
+
+Example:
+sn65hvs885@3 {
+ compatible = "ti,sn65hvs885";
+ spi-max-frequency = <10000000>;
+ latch-gpio = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+};
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
