Hi Naveen,
On Thursday 07 of November 2013 18:12:34 Naveen Krishna Chatradhi wrote:
> On Exynos5420 the TMU(4) for GPU has a seperate clock enable bit from
> the other TMU channels(0 ~ 3). Hence, accessing TRIMINFO for base_second
> should be acompanied by enabling the respective clock.
>
> This patch which allow for a "clk_sec" clock to be specified in the
> device-tree which will be ungated when accessing the TRIMINFO register.
>
> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
> ---
> drivers/thermal/samsung/exynos_tmu.c | 24 +++++++++++++++++++++++-
> 1 file changed, 23 insertions(+), 1 deletion(-)
This patch modifies the device binding, but fails to mention anything
about the modification in respective documentation. Please do not do that.
In addition, since the series adding support for Exynos 5420 has not been
merged yet, I would rather make this patch a part of that series.
Also please see my comment below.
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index b54825a..33edd1a 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
[snip]
> @@ -641,6 +650,15 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + data->clk_sec = devm_clk_get(&pdev->dev, "tmu_apbif_sec");
> + if (!IS_ERR(data->clk_sec)) {
This code does not check if the clock was specified for TMU channels that
require it, i.e. the driver will not fail if you don't specify this clock.
Instead, it would be better create a separate compatible value for such
channels, like "samsung,exynos5420-tmu-broken-triminfo", for which this
clock would be mandatory and for which, if this clock is not specified,
the driver would fail.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
