[PATCH] thermal: exynos: handle gate clock for misplaced TRIMINFO register

[Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>]

On Exynos5420 the TMU(4) for GPU has a seperate clock enable bit from
the other TMU channels(0 ~ 3). Hence, accessing TRIMINFO for base_second
should be acompanied by enabling the respective clock.

This patch which allow for a "clk_sec" clock to be specified in the
device-tree which will be ungated when accessing the TRIMINFO register.

Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
---
 drivers/thermal/samsung/exynos_tmu.c |   24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index b54825a..33edd1a 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -47,6 +47,7 @@
  * @irq_work: pointer to the irq work structure.
  * @lock: lock to implement synchronization.
  * @clk: pointer to the clock structure.
+ * @clk_sec: pointer to the clock structure for accessing the base_second.
  * @temp_error1: fused value of the first point trim.
  * @temp_error2: fused value of the second point trim.
  * @regulator: pointer to the TMU regulator structure.
@@ -61,7 +62,7 @@ struct exynos_tmu_data {
 	enum soc_type soc;
 	struct work_struct irq_work;
 	struct mutex lock;
-	struct clk *clk;
+	struct clk *clk, *clk_sec;
 	u8 temp_error1, temp_error2;
 	struct regulator *regulator;
 	struct thermal_sensor_conf *reg_conf;
@@ -152,6 +153,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_enable(data->clk_sec);
 
 	if (TMU_SUPPORTS(pdata, READY_STATUS)) {
 		status = readb(data->base + reg->tmu_status);
@@ -306,6 +309,8 @@ skip_calib_data:
 out:
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
+	if (!IS_ERR(data->clk_sec))
+		clk_disable(data->clk_sec);
 
 	return ret;
 }
@@ -457,12 +462,16 @@ static void exynos_tmu_work(struct work_struct *work)
 	const struct exynos_tmu_registers *reg = pdata->registers;
 	unsigned int val_irq, val_type;
 
+	if (!IS_ERR(data->clk_sec))
+		clk_enable(data->clk_sec);
 	/* Find which sensor generated this interrupt */
 	if (reg->tmu_irqstatus) {
 		val_type = readl(data->base_second + reg->tmu_irqstatus);
 		if (!((val_type >> data->id) & 0x1))
 			goto out;
 	}
+	if (!IS_ERR(data->clk_sec))
+		clk_disable(data->clk_sec);
 
 	exynos_report_trigger(data->reg_conf);
 	mutex_lock(&data->lock);
@@ -641,6 +650,15 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	data->clk_sec = devm_clk_get(&pdev->dev, "tmu_apbif_sec");
+	if (!IS_ERR(data->clk_sec)) {
+		ret = clk_prepare(data->clk_sec);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to get clock\n");
+			return  PTR_ERR(data->clk_sec);
+		}
+	}
+
 	if (pdata->type == SOC_ARCH_EXYNOS4210 ||
 	    pdata->type == SOC_ARCH_EXYNOS4412 ||
 	    pdata->type == SOC_ARCH_EXYNOS5250 ||
@@ -713,6 +731,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	return 0;
 err_clk:
 	clk_unprepare(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_unprepare(data->clk_sec);
 	return ret;
 }
 
@@ -725,6 +745,8 @@ static int exynos_tmu_remove(struct platform_device *pdev)
 	exynos_unregister_thermal(data->reg_conf);
 
 	clk_unprepare(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_unprepare(data->clk_sec);
 
 	if (!IS_ERR(data->regulator))
 		regulator_disable(data->regulator);
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html