On 01/13/2016 04:55 PM, Nishanth Menon wrote:
> On 01/13/2016 04:25 AM, H. Nikolaus Schaller wrote:
> [...]
>
>>>>>
>>>>> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>>>>>
>>>>> --- a/arch/arm/boot/dts/omap5-board-common.dtsi
>>>>> +++ b/arch/arm/boot/dts/omap5-board-common.dtsi
>>>>> @@ -213,6 +213,12 @@
>>>>> >;
>>>>> };
>>>>>
>>>>> + palmas_msecure_pins: palmas_msecure_pins {
>>>>> + pinctrl-single,pins = <
>>>>> + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE1) /* gpio8_234.sys_drm_msecure */
>>
>> I wonder now what MODE1 is.
>>
>> In my OMAP5 TRM (Version "Y" - may be too old) the MODE1 is tagged as "reserved".
>>
>> Maybe "reserved" happens to output a "1" on OMAP5 and a "0" on the X15?
>>
>> And as far as I am aware there is no "driver" for some MSECURE module (but I don't know the details of MSECURE control by software).
>
>
> Good catch. This one is interesting. If my memory serves me right,
> MSECURE signal from SoC is triggered in secure mode (trustzone) - the
> requirement was that certain PMIC modifications should only be done in
> secure mode for certain product applications. What this means is that
> certain functions of the PMIC will be unavailable when the SoC is
> running in "untrusted" mode.
>
> Instead, the usual mode of operation is to set it up as GPIO (as Nikolas
> pointed below) and either use GPIO HOG or default weak pull to keep it
> in the required state.
>
> I think it is better to set it as GPIO than as DRM_MSECURE.
>
> This is probably also the reason why this mode is NOT in public TRM -
> all security related topics are probably in the NDA only secure TRM
> addendum.
>
>
> I'd suggest setting up a GPIO hog and a mux to GPIO for board-common (we
> are not doing any HS OMAP5 at least in public domain :) ).
Yeah. As I remember the same issue was with OMAP4 (twl6030_omap4.dtsi)
and, again if i remember correctly, someone reported that sys_drm_msecure might have different values
on different SoCs. Also I'd like to note that on Old non-DT kernel such functionality
was always modeled using GPIO.
--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
