Hi Tony,
Am 12.01.2016 um 14:30 schrieb H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>:
> Hi Tony,
>
> Am 12.01.2016 um 01:09 schrieb Tony Lindgren <tony@xxxxxxxxxxx>:
>
>> * Tony Lindgren <tony@xxxxxxxxxxx> [160111 12:27]:
>>>
>>> OK so the issue is that the twl msecure pin should be high to enable
>>> the RTC registers. We used to have that code with platform_data, but
>>> no longer have it with device tree based booting. I'll send a patch
>>> for that.
>>>
>>> Curiously setting jumper j5 on beagle-x15 that controls what used to
>>> be the msecure and now is powerhold, does the opposite.. The
>>> device boots automatically but RTC is stopped?
>>
>> And here's a fix the issue for omap5. Beagle-x15 needs to be
>> investigated more.
>>
>> Care to test it with your RTC enabling patch?
>
> yes, I will test asap.
>
> Reminds me on some issues we did have with msecure and twl4030 rtc some years ago.
Ok, works for me on OMAP5432EVM.
Thanks for spotting the issue.
>
> BR,
> Nikolaus
>
>>
>> Regards,
>>
>> Tony
>>
>> 8< ---------------
>> From: Tony Lindgren <tony@xxxxxxxxxxx>
>> Date: Mon, 11 Jan 2016 14:35:24 -0800
>> Subject: [PATCH] ARM: dts: Fix omap5 PMIC control lines for RTC writes
>>
>> The palmas PMIC has some control lines that need to be muxed properly
>> for things to work. The sys_nirq pin is used for interrupts, and msecure
>> pin is used for enabling writes to some PMIC registers.
>>
>> Without these pins configured properly things can fail in mysterious
>> ways. For example, we can't update the RTC registers on palmas PMIC
>> unless the msecure pin is configured. And this is probably the reason
>> why we had RTC missing from the omap5 dts file.
>>
>> According to "OMAP5430 ES2.0 Data Manual [Public] VErsion A (Rev. F)"
>> swps052f.pdf, mux mode 1 is for sys_drm_msecure so there's no need to
>> configure it as a GPIO pin.
>>
>> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>>
>> --- a/arch/arm/boot/dts/omap5-board-common.dtsi
>> +++ b/arch/arm/boot/dts/omap5-board-common.dtsi
>> @@ -213,6 +213,12 @@
>> >;
>> };
>>
>> + palmas_msecure_pins: palmas_msecure_pins {
>> + pinctrl-single,pins = <
>> + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE1) /* gpio8_234.sys_drm_msecure */
>> + >;
>> + };
>> +
>> usbhost_pins: pinmux_usbhost_pins {
>> pinctrl-single,pins = <
>> 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
>> @@ -278,6 +284,12 @@
>> &usbhost_wkup_pins
>> >;
>>
>> + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
>> + pinctrl-single,pins = <
>> + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
>> + >;
>> + };
>> +
>> usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
>> pinctrl-single,pins = <
>> 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
>> @@ -345,6 +357,8 @@
>> interrupt-controller;
>> #interrupt-cells = <2>;
>> ti,system-power-controller;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
>>
>> extcon_usb3: palmas_usb {
>> compatible = "ti,palmas-usb-vid";
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
