Re: [PATCH v2 03/12] ARM: dts: rockchip: override the clocks in i2s for kylin board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Heiko,

在 2016年01月09日 10:31, Heiko Stuebner 写道:
Hi Caesar,

Am Donnerstag, 7. Januar 2016, 16:25:46 schrieb Caesar Wang:
The sysclk seems be incorrect since we use the simple card for kylin
board.

The simple card call:

asoc_simple_card_probe ->
  asoc_simple_card_dai_link_of ->
   asoc_simple_card_sub_parse_of ->
...
clk = of_clk_get(args.np, 0);
if (!IS_ERR(clk))
dai->sysclk = clk_get_rate(clk);

The sysclk come from the first clock, then first clock is hclk_i2s
in i2s for rk3036 dtsi.
So, we can override the clocks to fit the simple card in here.
It's not that effective, doing that change on a per-board level - as it
would possibly need to be repeated for future boards.
The i2s driver doesn't care, as it uses named clocks, so I instead did
the swap in the rk3036.dtsi for all boards. Can you check if that is ok
for you or if I did overlook something?

That's okay for me.


Thanks
Heiko

------- 8< -------
Subject: [PATCH] ARM: dts: rockchip: swap i2s clock ordering on rk3036

For sound setups using the simple-card mechanism, the main clock
(sysclk) is expected to be the first element. For the i2s-driver
itself it doesn't matter, as it uses named clocks, so we can just
swap them.

Reported-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
  arch/arm/boot/dts/rk3036.dtsi | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 8f1bb0f..ee457a2 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -241,8 +241,8 @@
  		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
  		#address-cells = <1>;
  		#size-cells = <0>;
-		clock-names = "i2s_hclk", "i2s_clk";
-		clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
  		dmas = <&pdma 0>, <&pdma 1>;
  		dma-names = "tx", "rx";
  		pinctrl-names = "default";


--
Thanks,
Caesar

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux