Hi all, Happy new year! :) Let's go on working for happy. This series patches are based on kernel version 4.4.0-rc8+ (Linux version 4.4.0-rc8+ (wxt@ubuntu)...#142 SMP Thu Jan 7 12:38:40 CST 2016) This series pacthes are verified on the following github: https://github.com/Caesar-github/rockchip/commits/kylin-develop4.4 This series has 12 patches: (12--->1) bbd1a01 ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs fb8c1fd ARM: dts: rockchip: add the lcdc and hdmi node for rk3036 1aeb49d ARM: dts: rockchip: add the sdmmc for kylin board 3e19128 ARM: dts: rockchip: enable the uart0 for kylin board e7de154 ARM: dts: rockchip: add the wifi/bt regulator for kylin board 8699698 ARM: dts: rockchip: enable the high speed on sdio for kylin board 21eded4 mmc: pwrseq: add support for power-on sequencing through DT cdf3a7e mmc: pwrseq: Document optional exteral vcc for the simple power sequence 131c249 clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out b7ff8e1 ARM: dts: rockchip: override the clocks in i2s for kylin board 5f56af4 ARM: dts: rockchip: add the sound codec for kylin board 914d9c0 ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s .. This series patches have the following decriptions: PATCH[1/12-4/12]:====> Support rt5616 codec for kylin board 914d9c0 ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s 5f56af4 ARM: dts: rockchip: add the sound codec for kylin board b7ff8e1 ARM: dts: rockchip: override the clocks in i2s for kylin board 131c249 clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out This patches is working for codec rt5616 on kylin board. (RK3036 SoCs) That's needed the following rt5616 driver from Mark Brown Branch. (cherry picked from git.kernel.org broonie/sound.git for-next) cf94b7a UPSTREAM: ASoC: rt5616: rename some alsa control names 86f561d UPSTREAM: ASoC: rt5616: add devicetree document for rt5616 0e0f5f8 UPSTREAM: ASoC: rt5616: add an of_match table 263a330 UPSTREAM: ASoC: rt5616: Return error if device ID mismatch 0094139 UPSTREAM: ASoC: rt5616: add rt5616 codec driver Notes: I'm run it with the ubuntu 15.04 to set the configure. ./amixer "HP Playback Switch" 1 ./amixer "HP Playback Volume" 20 ./amixer "HPO MIX DAC1 Switch" 1 ./amixer "OUT MIXR DAC R1 Switch" 1 ./amixer "OUT MIXL DAC L1 Switch" 1 ./amixer "Stereo DAC MIXR DAC R1 Switch" 1 ./amixer "Stereo DAC MIXL DAC L1 Switch" 1 root@linaro-alip:/media/aplay# ./aplay pcm.wav Playing sample: 2 ch, 48000 hz, 16 bit .. That can be normal playing the music. ---- PATCH[5/12-9/12]: ====> Support wifi/bt module for kylin board cdf3a7e mmc: pwrseq: Document optional exteral vcc for the simple power sequence 21eded4 mmc: pwrseq: add support for power-on sequencing through DT 8699698 ARM: dts: rockchip: enable the high speed on sdio for kylin board e7de154 ARM: dts: rockchip: add the wifi/bt regulator for kylin board 3e19128 ARM: dts: rockchip: enable the uart0 for kylin board The wifi/bt driver hasn't land in mainline, the driver is in here: https://github.com/Caesar-github/rockchip/commit/1912ef4c0e358677904b0a0bbb83f9745066f0ec wpa_supplicant -Dnl80211 -c /etc/wifi/wpa_supplicant.conf -i wlan0 -B wpa_cli add_network wpa_cli set_network 1 ssid \"wxt\" wpa_cli set_network 1 psk \"123456789\" wpa_cli select_network 1 wpa_cli save_config ifconfig wlan0 192.168.1.105 route add default gw 192.168.1.1 root@linaro-alip:/# ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=6.83 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=184 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=9.21 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.84 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=11.2 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=9.24 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=12.9 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=7.02 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=24.3 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=13.6 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=3.87 m ... The wifi throughput: iperf -s -i 1 ... [ 4] 116.0-117.0 sec 2.88 MBytes 24.1 Mbits/sec [ 4] 117.0-118.0 sec 2.99 MBytes 25.0 Mbits/sec [ 4] 118.0-119.0 sec 3.01 MBytes 25.2 Mbits/sec [ 4] 119.0-120.0 sec 2.89 MBytes 24.2 Mbits/sec [ 4] 0.0-120.4 sec 332 MBytes 23.1 Mbits/sec ---- PATCH[10/12]: ====> sdmmc patch for kylin board ARM: dts: rockchip: add the sdmmc for kylin board You should mark it "oaky" if you want to use the sdmmc. This patch default is disabing the sdmmc since the sdmmc and uart2(debug port) is reusing pin. ---- PATCH[11/12]: ====> hdmi/lcdc diaply patch for rk3036 dts ARM: dts: rockchip: add the lcdc and hdmi node for rk3036 We can add this patch to support it since the Mark Yao has land your vop support. https://github.com/markyzq/kernel-drm-rockchip/commits/drm-rockchip-next-2015-12-28 ---- PATCH[12/12]:====> DMA Patchs ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs In order to be better read/write for emmc. This patch is based on the following:(Fix broken DMAFLUSHP on Rockchips platform) 3055695 FROMLIST: DMA: dmaengine: expose max burst capability to clientmZ (am from https://patchwork.kernel.org/patch/7399361/) ed56bee FROMLIST: DMA: pl330: add quirk for broken no flushp (am from https://patchwork.kernel.org/patch/7399371/) 0c43bc3 FROMLIST: Documentation: arm-pl330: add description of arm, pl330-broken-no-flushp (am from https://patchwork.kernel.org/patch/7399371/) 623a699 FROMLIST: DMA: pl330: support burst mode for dev-to-mem and mem-to-dev transmit (am from https://patchwork.kernel.org/patch/7399381/) ---- Changes in v2: - modify the commit. - fix the mclk-fs as the 256. - This fix inmmc-power-sequences, as Heiko comment on https://patchwork.kernel.org/patch/7903161/ - As Heiko comment, modify it to fit the simple-mmc-sequence. - Add the uart0 commit content. Caesar Wang (12): ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s ARM: dts: rockchip: add the sound codec for kylin board ARM: dts: rockchip: override the clocks in i2s for kylin board clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out mmc: pwrseq: Document optional exteral vcc for the simple power sequence mmc: pwrseq: add support for power-on sequencing through DT ARM: dts: rockchip: enable the high speed on sdio for kylin board ARM: dts: rockchip: add the wifi/bt regulator for kylin board ARM: dts: rockchip: enable the uart0 for kylin board ARM: dts: rockchip: add the sdmmc for kylin board ARM: dts: rockchip: add the lcdc and hdmi node for rk3036 ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs .../devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 9 ++ arch/arm/boot/dts/rk3036-kylin.dts | 119 +++++++++++++++++++++ arch/arm/boot/dts/rk3036.dtsi | 74 +++++++++++-- drivers/clk/rockchip/clk-rk3036.c | 2 +- drivers/mmc/core/pwrseq_simple.c | 16 +++ 5 files changed, 213 insertions(+), 7 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html