Hi Caesar, Am Donnerstag, 7. Januar 2016, 16:25:43 schrieb Caesar Wang: > Hi all, > > Happy new year! :) > Let's go on working for happy. please make sure to split your patch-series at appropriate points for future versions to only address relevant people. For example I don't think Ulf really cares about getting the audio-related or general devicetree patches. Heiko > This series patches are based on kernel version 4.4.0-rc8+ > (Linux version 4.4.0-rc8+ (wxt@ubuntu)...#142 SMP Thu Jan 7 12:38:40 CST > 2016) > > This series pacthes are verified on the following github: > https://github.com/Caesar-github/rockchip/commits/kylin-develop4.4 > > This series has 12 patches: (12--->1) > bbd1a01 ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs > fb8c1fd ARM: dts: rockchip: add the lcdc and hdmi node for rk3036 > 1aeb49d ARM: dts: rockchip: add the sdmmc for kylin board > 3e19128 ARM: dts: rockchip: enable the uart0 for kylin board > e7de154 ARM: dts: rockchip: add the wifi/bt regulator for kylin board > 8699698 ARM: dts: rockchip: enable the high speed on sdio for kylin board > 21eded4 mmc: pwrseq: add support for power-on sequencing through DT > cdf3a7e mmc: pwrseq: Document optional exteral vcc for the simple power > sequence 131c249 clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag > for sclk_i2s_out b7ff8e1 ARM: dts: rockchip: override the clocks in i2s > for kylin board 5f56af4 ARM: dts: rockchip: add the sound codec for kylin > board > 914d9c0 ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s > .. > > This series patches have the following decriptions: > > PATCH[1/12-4/12]:====> Support rt5616 codec for kylin board > 914d9c0 ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s > 5f56af4 ARM: dts: rockchip: add the sound codec for kylin board > b7ff8e1 ARM: dts: rockchip: override the clocks in i2s for kylin board > 131c249 clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for > sclk_i2s_out > > This patches is working for codec rt5616 on kylin board. (RK3036 SoCs) > > That's needed the following rt5616 driver from Mark Brown Branch. > (cherry picked from git.kernel.org broonie/sound.git for-next) > > cf94b7a UPSTREAM: ASoC: rt5616: rename some alsa control names > 86f561d UPSTREAM: ASoC: rt5616: add devicetree document for rt5616 > 0e0f5f8 UPSTREAM: ASoC: rt5616: add an of_match table > 263a330 UPSTREAM: ASoC: rt5616: Return error if device ID mismatch > 0094139 UPSTREAM: ASoC: rt5616: add rt5616 codec driver > > Notes: > I'm run it with the ubuntu 15.04 to set the configure. > ./amixer "HP Playback Switch" 1 > ./amixer "HP Playback Volume" 20 > ./amixer "HPO MIX DAC1 Switch" 1 > ./amixer "OUT MIXR DAC R1 Switch" 1 > ./amixer "OUT MIXL DAC L1 Switch" 1 > ./amixer "Stereo DAC MIXR DAC R1 Switch" 1 > ./amixer "Stereo DAC MIXL DAC L1 Switch" 1 > > root@linaro-alip:/media/aplay# ./aplay pcm.wav > Playing sample: 2 ch, 48000 hz, 16 bit > .. > That can be normal playing the music. > ---- > > PATCH[5/12-9/12]: ====> Support wifi/bt module for kylin board > cdf3a7e mmc: pwrseq: Document optional exteral vcc for the simple power > sequence 21eded4 mmc: pwrseq: add support for power-on sequencing through > DT 8699698 ARM: dts: rockchip: enable the high speed on sdio for kylin > board e7de154 ARM: dts: rockchip: add the wifi/bt regulator for kylin > board 3e19128 ARM: dts: rockchip: enable the uart0 for kylin board > > The wifi/bt driver hasn't land in mainline, the driver is in here: > https://github.com/Caesar-github/rockchip/commit/1912ef4c0e358677904b0a0bb > b83f9745066f0ec > > wpa_supplicant -Dnl80211 -c /etc/wifi/wpa_supplicant.conf -i wlan0 -B > wpa_cli add_network > wpa_cli set_network 1 ssid \"wxt\" > wpa_cli set_network 1 psk \"123456789\" > wpa_cli select_network 1 > wpa_cli save_config > > ifconfig wlan0 192.168.1.105 > route add default gw 192.168.1.1 > > root@linaro-alip:/# ping 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=6.83 ms > 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=184 ms > 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=9.21 ms > 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.84 ms > 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=11.2 ms > 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=9.24 ms > 64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=12.9 ms > 64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=7.02 ms > 64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=24.3 ms > 64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=13.6 ms > 64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=3.87 m > ... > > The wifi throughput: > > iperf -s -i 1 > ... > [ 4] 116.0-117.0 sec 2.88 MBytes 24.1 Mbits/sec > [ 4] 117.0-118.0 sec 2.99 MBytes 25.0 Mbits/sec > [ 4] 118.0-119.0 sec 3.01 MBytes 25.2 Mbits/sec > [ 4] 119.0-120.0 sec 2.89 MBytes 24.2 Mbits/sec > [ 4] 0.0-120.4 sec 332 MBytes 23.1 Mbits/sec > ---- > > PATCH[10/12]: ====> sdmmc patch for kylin board > ARM: dts: rockchip: add the sdmmc for kylin board > > You should mark it "oaky" if you want to use the sdmmc. > This patch default is disabing the sdmmc since the sdmmc and > uart2(debug port) is reusing pin. > ---- > > PATCH[11/12]: ====> hdmi/lcdc diaply patch for rk3036 dts > ARM: dts: rockchip: add the lcdc and hdmi node for rk3036 > > We can add this patch to support it since the Mark Yao has land > your vop support. > https://github.com/markyzq/kernel-drm-rockchip/commits/drm-rockchip-next-2 > 015-12-28 ---- > > PATCH[12/12]:====> DMA Patchs > ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs > > In order to be better read/write for emmc. > This patch is based on the following:(Fix broken DMAFLUSHP on Rockchips > platform) > > 3055695 FROMLIST: DMA: dmaengine: expose max burst capability to clientmZ > (am from https://patchwork.kernel.org/patch/7399361/) > ed56bee FROMLIST: DMA: pl330: add quirk for broken no flushp > (am from https://patchwork.kernel.org/patch/7399371/) > 0c43bc3 FROMLIST: Documentation: arm-pl330: add description of arm, > pl330-broken-no-flushp (am from > https://patchwork.kernel.org/patch/7399371/) > 623a699 FROMLIST: DMA: pl330: support burst mode for dev-to-mem and > mem-to-dev transmit (am from https://patchwork.kernel.org/patch/7399381/) > ---- > > > Changes in v2: > - modify the commit. > - fix the mclk-fs as the 256. > - This fix inmmc-power-sequences, as Heiko comment on > https://patchwork.kernel.org/patch/7903161/ > - As Heiko comment, modify it to fit the simple-mmc-sequence. > - Add the uart0 commit content. > > Caesar Wang (12): > ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s > ARM: dts: rockchip: add the sound codec for kylin board > ARM: dts: rockchip: override the clocks in i2s for kylin board > clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for > sclk_i2s_out > mmc: pwrseq: Document optional exteral vcc for the simple power > sequence > mmc: pwrseq: add support for power-on sequencing through DT > ARM: dts: rockchip: enable the high speed on sdio for kylin board > ARM: dts: rockchip: add the wifi/bt regulator for kylin board > ARM: dts: rockchip: enable the uart0 for kylin board > ARM: dts: rockchip: add the sdmmc for kylin board > ARM: dts: rockchip: add the lcdc and hdmi node for rk3036 > ARM: dts: Add pl330-broken-no-flushp quirk for rk3036 SoCs > > .../devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 9 ++ > arch/arm/boot/dts/rk3036-kylin.dts | 119 > +++++++++++++++++++++ arch/arm/boot/dts/rk3036.dtsi > | 74 +++++++++++-- drivers/clk/rockchip/clk-rk3036.c | > 2 +- > drivers/mmc/core/pwrseq_simple.c | 16 +++ > 5 files changed, 213 insertions(+), 7 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
