Re: [PATCH v10 1/8] ARM: dt: Binding documentation for imx25 ADC/TSC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, 14 Dec 2015, Markus Pargmann wrote:

> This documentation describes the devicetree bindings for the
> ADC/Touchscreen unit of the i.MX25 SoC.
> 
> Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> 
> Notes:
>     Changes in v9:
>      - Fixed some style things.
>     
>     Changes in v6:
>      - Removed adc-ref property and replaced it with refp and refn for positive and
>        negative references. The properties are optional now as the default
>        behaviour is a positive internal reference voltage and ADC GND as negative
>        reference.
> 
>  .../devicetree/bindings/mfd/fsl-imx25-tsadc.txt    | 47 ++++++++++++++++++++++
>  1 file changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt

Binding looks fine, but you need to change the subject line of the
patch, for is it not an ARM, but MFD patch.

> diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> new file mode 100644
> index 000000000000..b03505286997
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
> @@ -0,0 +1,47 @@
> +Freescale MX25 ADC/TSC MultiFunction Device (MFD)
> +
> +This device combines two general purpose conversion queues one used for general
> +ADC and the other used for touchscreens.
> +
> +Required properties:
> + - compatible:			Should be "fsl,imx25-tsadc".
> + - reg:				Start address and size of the memory area of
> + 					the device
> + - interrupts:			Interrupt for this device
> +					(See: ../interrupt-controller/interrupts.txt)
> + - clocks:			An 'ipg' clock (See: ../clock/clock-bindings.txt)
> + - interrupt-controller:	This device is an interrupt controller. It
> +   					controls the interrupts of both
> +					conversion queues.
> + - #interrupt-cells:		Should be '<1>'.
> + - #address-cells:		Should be '<1>'.
> + - #size-cells:			Should be '<1>'.
> +
> +This device includes two conversion queues which can be added as subnodes.
> +The first queue is for the touchscreen, the second for general purpose ADC.
> +
> +Example:
> +	tscadc: tscadc@50030000 {
> +		compatible = "fsl,imx25-tsadc";
> +		reg = <0x50030000 0xc>;
> +		interrupts = <46>;
> +		clocks = <&clks 119>;
> +		clock-names = "ipg";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		tsc: tcq@50030400 {
> +			compatible = "fsl,imx25-tcq";
> +			reg = <0x50030400 0x60>;
> +			...
> +		};
> +
> +		adc: gcq@50030800 {
> +			compatible = "fsl,imx25-gcq";
> +			reg = <0x50030800 0x60>;
> +			...
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux