On Mon, 14 Dec 2015, Markus Pargmann wrote: > This is the core driver for imx25 touchscreen/adc driver. The module > has one shared ADC and two different conversion queues which use the > ADC. The two queues are identical. Both can be used for general purpose > ADC but one is meant to be used for touchscreens. > > This driver is the core which manages the central components and > registers of the TSC/ADC unit. It manages the IRQs and forwards them to > the correct components. > > Signed-off-by: Markus Pargmann <mpa@xxxxxxxxxxxxxx> > Signed-off-by: Denis Carikli <denis@xxxxxxxxxx> > > [ensure correct ADC clock depending on the IPG clock] > Signed-off-by: Juergen Borleis <jbe@xxxxxxxxxxxxxx> > Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx> > --- > > Notes: > Changes in v7: > - Cleanup bit defines in header files to be more readable > - Fix irq check to return with an error for irq <= 0 > - Add COMPILE_TEST in Kconfig file > > Changes in v5: > - Remove ifdef CONFIG_OF as this driver is only for DT usage > - Remove module owner > - Add Kconfig dependencies ARCH_MX25 and OF > > drivers/mfd/Kconfig | 9 ++ > drivers/mfd/Makefile | 2 + > drivers/mfd/fsl-imx25-tsadc.c | 203 ++++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++ > 4 files changed, 354 insertions(+) > create mode 100644 drivers/mfd/fsl-imx25-tsadc.c > create mode 100644 include/linux/mfd/imx25-tsadc.h For my own reference: Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> I will apply this and sent out pull-requests to the relevant maintainers once -rc1 is out. [...] -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html