Add basic support for the sil902x RGB -> HDMI bridge. This driver does not support audio output yet. Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> --- Hello, This patch is only adding basic support for the sil9022 chip. As stated in the commit log, there's no audio support, but the driver also hardcodes a lot of things (like the RGB input format to use). There are two reasons for this: 1/ the DRM framework does not allow for advanced link description between an encoder and a bridge (that's for the RGB format limitation). Any idea how this should be described? 2/ I don't have the datasheet of this HDMI encoder, and all logic has been extracted from those two drivers [1][2], which means I may miss some important things in my encoder setup. Another thing I find weird in the drm_bridge interface is the fact that we have a ->attach() method, but no ->detach(), which can be a problem if we allow drm bridges and KMS drivers to be compiled as modules. Any reason for that? That's all for the questions part :-). Best Regards, Boris --- drivers/gpu/drm/bridge/Kconfig | 8 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/sil902x.c | 491 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 500 insertions(+) create mode 100644 drivers/gpu/drm/bridge/sil902x.c diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 27e2022..9701fd2 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -40,4 +40,12 @@ config DRM_PARADE_PS8622 ---help--- Parade eDP-LVDS bridge chip driver. +config DRM_SIL902X + tristate "Silicon Image sil902x RGB/HDMI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + ---help--- + Silicon Image sil902x bridge chip driver. + endmenu diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index f13c33d..a689aad 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o +obj-$(CONFIG_DRM_SIL902X) += sil902x.o diff --git a/drivers/gpu/drm/bridge/sil902x.c b/drivers/gpu/drm/bridge/sil902x.c new file mode 100644 index 0000000..230732d --- /dev/null +++ b/drivers/gpu/drm/bridge/sil902x.c @@ -0,0 +1,491 @@ +/* + * Copyright (C) 2014 Atmel + * Bo Shen <voice.shen@xxxxxxxxx> + * + * Authors: Bo Shen <voice.shen@xxxxxxxxx> + * Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> + * Wu, Songjun <Songjun.Wu@xxxxxxxxx> + * + * + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/component.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_encoder_slave.h> + +#define SIL902X_TPI_VIDEO_DATA 0x0 + +#define SIL902X_TPI_PIXEL_REPETITION 0x8 +#define SIL902X_TPI_AVI_PIXEL_REP_BUS_24BIT BIT(5) +#define SIL902X_TPI_AVI_PIXEL_REP_RISING_EDGE BIT(4) +#define SIL902X_TPI_AVI_PIXEL_REP_4X 3 +#define SIL902X_TPI_AVI_PIXEL_REP_2X 1 +#define SIL902X_TPI_AVI_PIXEL_REP_NONE 0 +#define SIL902X_TPI_CLK_RATIO_HALF (0 << 6) +#define SIL902X_TPI_CLK_RATIO_1X (1 << 6) +#define SIL902X_TPI_CLK_RATIO_2X (2 << 6) +#define SIL902X_TPI_CLK_RATIO_4X (3 << 6) + +#define SIL902X_TPI_AVI_IN_FORMAT 0x9 +#define SIL902X_TPI_AVI_INPUT_BITMODE_12BIT BIT(7) +#define SIL902X_TPI_AVI_INPUT_DITHER BIT(6) +#define SIL902X_TPI_AVI_INPUT_RANGE_LIMITED (2 << 2) +#define SIL902X_TPI_AVI_INPUT_RANGE_FULL (1 << 2) +#define SIL902X_TPI_AVI_INPUT_RANGE_AUTO (0 << 2) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_BLACK (3 << 0) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_YUV422 (2 << 0) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_YUV444 (1 << 0) +#define SIL902X_TPI_AVI_INPUT_COLORSPACE_RGB (0 << 0) + +#define SIL902X_TPI_AVI_INFOFRAME 0x0c + +#define SIL902X_SYS_CTRL_DATA 0x1a +#define SIL902X_SYS_CTRL_PWR_DWN BIT(4) +#define SIL902X_SYS_CTRL_AV_MUTE BIT(3) +#define SIL902X_SYS_CTRL_DDC_BUS_REQ BIT(2) +#define SIL902X_SYS_CTRL_DDC_BUS_GRTD BIT(1) +#define SIL902X_SYS_CTRL_OUTPUT_MODE BIT(0) +#define SIL902X_SYS_CTRL_OUTPUT_HDMI 1 +#define SIL902X_SYS_CTRL_OUTPUT_DVI 0 + +#define SIL902X_REG_CHIPID(n) (0x1b + (n)) + +#define SIL902X_PWR_STATE_CTRL 0x1e +#define SIL902X_AVI_POWER_STATE_MSK GENMASK(1, 0) +#define SIL902X_AVI_POWER_STATE_D(l) ((l) & SIL902X_AVI_POWER_STATE_MSK) + +#define SI902X_INT_ENABLE 0x3c +#define SI902X_INT_STATUS 0x3d +#define SI902X_HOTPLUG_EVENT BIT(0) +#define SI902X_PLUGGED_STATUS BIT(2) + +#define SIL902X_REG_TPI_RQB 0xc7 + +struct sil902x { + struct i2c_client *i2c; + struct regmap *regmap; + struct drm_bridge bridge; + struct drm_connector connector; + struct gpio_desc *reset_gpio; + struct work_struct hotplug_work; +}; + +static inline struct sil902x *bridge_to_sil902x(struct drm_bridge *bridge) +{ + return container_of(bridge, struct sil902x, bridge); +} + +static inline struct sil902x *connector_to_sil902x(struct drm_connector *con) +{ + return container_of(con, struct sil902x, connector); +} + +static void sil902x_reset(struct sil902x *sil902x) +{ + gpiod_set_value(sil902x->reset_gpio, 1); + + msleep(100); + + gpiod_set_value(sil902x->reset_gpio, 0); +} + +static void sil902x_connector_destroy(struct drm_connector *connector) +{ + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +static enum drm_connector_status +sil902x_connector_detect(struct drm_connector *connector, bool force) +{ + struct sil902x *sil902x = connector_to_sil902x(connector); + unsigned int status; + + regmap_read(sil902x->regmap, SI902X_INT_STATUS, &status); + + return (status & SI902X_PLUGGED_STATUS) ? + connector_status_connected : connector_status_disconnected; +} + +static const struct drm_connector_funcs sil902x_atomic_connector_funcs = { + .dpms = drm_atomic_helper_connector_dpms, + .detect = sil902x_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = sil902x_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static const struct drm_connector_funcs sil902x_connector_funcs = { + .dpms = drm_atomic_helper_connector_dpms, + .detect = sil902x_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = sil902x_connector_destroy, +}; + +static int sil902x_get_modes(struct drm_connector *connector) +{ + struct sil902x *sil902x = connector_to_sil902x(connector); + struct regmap *regmap = sil902x->regmap; + u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + unsigned int status; + struct edid *edid; + int num = 0; + int ret; + int i; + + ret = regmap_update_bits(regmap, SIL902X_PWR_STATE_CTRL, + SIL902X_AVI_POWER_STATE_MSK, + SIL902X_AVI_POWER_STATE_D(2)); + if (ret) + return ret; + + ret = regmap_write(regmap, SIL902X_SYS_CTRL_DATA, + SIL902X_SYS_CTRL_OUTPUT_HDMI | + SIL902X_SYS_CTRL_PWR_DWN); + if (ret) + return ret; + + ret = regmap_update_bits(regmap, SIL902X_SYS_CTRL_DATA, + SIL902X_SYS_CTRL_DDC_BUS_REQ, + SIL902X_SYS_CTRL_DDC_BUS_REQ); + if (ret) + return ret; + + i = 0; + do { + ret = regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status); + if (ret) + return ret; + i++; + } while (!(status & SIL902X_SYS_CTRL_DDC_BUS_GRTD)); + + ret = regmap_write(regmap, SIL902X_SYS_CTRL_DATA, status); + if (ret) + return ret; + + edid = drm_get_edid(connector, sil902x->i2c->adapter); + drm_mode_connector_update_edid_property(connector, edid); + if (edid) { + num += drm_add_edid_modes(connector, edid); + kfree(edid); + } + + ret = drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + if (ret) + return ret; + + regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status); + if (ret) + return ret; + + ret = regmap_update_bits(regmap, SIL902X_SYS_CTRL_DATA, + SIL902X_SYS_CTRL_DDC_BUS_REQ | + SIL902X_SYS_CTRL_DDC_BUS_GRTD, 0); + if (ret) + return ret; + + i = 0; + do { + ret = regmap_read(regmap, SIL902X_SYS_CTRL_DATA, &status); + if (ret) + return ret; + i++; + } while (status & (SIL902X_SYS_CTRL_DDC_BUS_REQ | + SIL902X_SYS_CTRL_DDC_BUS_GRTD)); + + return num; +} + +static enum drm_mode_status sil902x_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + /* TODO: check mode */ + + return MODE_OK; +} + +static struct drm_encoder *sil902x_best_encoder(struct drm_connector *connector) +{ + struct sil902x *sil902x = connector_to_sil902x(connector); + + return sil902x->bridge.encoder; +} + +static const struct drm_connector_helper_funcs sil902x_connector_helper_funcs = { + .get_modes = sil902x_get_modes, + .mode_valid = sil902x_mode_valid, + .best_encoder = sil902x_best_encoder, +}; + +static void sil902x_bridge_disable(struct drm_bridge *bridge) +{ + struct sil902x *sil902x = bridge_to_sil902x(bridge); + + regmap_update_bits(sil902x->regmap, SIL902X_SYS_CTRL_DATA, + SIL902X_SYS_CTRL_PWR_DWN, + SIL902X_SYS_CTRL_PWR_DWN); +} + +static void sil902x_bridge_enable(struct drm_bridge *bridge) +{ + struct sil902x *sil902x = bridge_to_sil902x(bridge); + + regmap_update_bits(sil902x->regmap, SIL902X_PWR_STATE_CTRL, + SIL902X_AVI_POWER_STATE_MSK, + SIL902X_AVI_POWER_STATE_D(0)); + regmap_update_bits(sil902x->regmap, SIL902X_SYS_CTRL_DATA, + SIL902X_SYS_CTRL_PWR_DWN, 0); +} + +static void sil902x_bridge_mode_set(struct drm_bridge *bridge, + struct drm_display_mode *mode, + struct drm_display_mode *adj) +{ + u8 buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE]; + struct sil902x *sil902x = bridge_to_sil902x(bridge); + struct regmap *regmap = sil902x->regmap; + struct hdmi_avi_infoframe frame; + int ret; + + buf[0] = adj->clock; + buf[1] = adj->clock >> 8; + buf[2] = adj->vrefresh; + buf[3] = 0x00; + buf[4] = adj->hdisplay; + buf[5] = adj->hdisplay >> 8; + buf[6] = adj->vdisplay; + buf[7] = adj->vdisplay >> 8; + buf[8] = SIL902X_TPI_CLK_RATIO_1X | SIL902X_TPI_AVI_PIXEL_REP_NONE | + SIL902X_TPI_AVI_PIXEL_REP_BUS_24BIT; + buf[9] = SIL902X_TPI_AVI_INPUT_RANGE_AUTO | + SIL902X_TPI_AVI_INPUT_COLORSPACE_RGB; + + ret = regmap_bulk_write(regmap, SIL902X_TPI_VIDEO_DATA, buf, 10); + if (ret) + return; + + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj); + if (ret < 0) { + DRM_ERROR("couldn't fill AVI infoframe\n"); + return; + } + + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); + if (ret < 0) { + DRM_ERROR("failed to pack AVI infoframe: %zd\n", ret); + return; + } + + /* Do not send the infoframe header, but keep the CRC field. */ + regmap_bulk_write(regmap, SIL902X_TPI_AVI_INFOFRAME, + buf + HDMI_INFOFRAME_HEADER_SIZE - 1, + HDMI_AVI_INFOFRAME_SIZE + 1); +} + +static int sil902x_bridge_attach(struct drm_bridge *bridge) +{ + const struct drm_connector_funcs *funcs = &sil902x_connector_funcs; + struct sil902x *sil902x = bridge_to_sil902x(bridge); + struct drm_device *drm = bridge->dev; + int ret; + + drm_connector_helper_add(&sil902x->connector, + &sil902x_connector_helper_funcs); + + if (drm_core_check_feature(drm, DRIVER_ATOMIC)) + funcs = &sil902x_atomic_connector_funcs; + + ret = drm_connector_init(drm, &sil902x->connector, funcs, + DRM_MODE_CONNECTOR_HDMIA); + if (ret) + return ret; + + if (sil902x->i2c->irq > 0) + sil902x->connector.polled = DRM_CONNECTOR_POLL_HPD; + else + sil902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT; + + drm_mode_connector_attach_encoder(&sil902x->connector, bridge->encoder); + + return 0; +} + +static void sil902x_bridge_nop(struct drm_bridge *bridge) +{ +} + +static const struct drm_bridge_funcs sil902x_bridge_funcs = { + .attach = sil902x_bridge_attach, + .mode_set = sil902x_bridge_mode_set, + .disable = sil902x_bridge_disable, + .post_disable = sil902x_bridge_nop, + .pre_enable = sil902x_bridge_nop, + .enable = sil902x_bridge_enable, +}; + +static const struct regmap_range sil902x_volatile_ranges[] = { + { .range_min = 0, .range_max = 0xff }, +}; + +static const struct regmap_access_table sil902x_volatile_table = { + .yes_ranges = sil902x_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(sil902x_volatile_ranges), +}; + +static const struct regmap_config sil902x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &sil902x_volatile_table, + .cache_type = REGCACHE_NONE, +}; + +static irqreturn_t sil902x_interrupt(int irq, void *data) +{ + struct sil902x *sil902x = data; + unsigned int status = 0; + + regmap_read(sil902x->regmap, SI902X_INT_STATUS, &status); + regmap_write(sil902x->regmap, SI902X_INT_STATUS, status); + + if ((status & SI902X_HOTPLUG_EVENT) && sil902x->bridge.dev) + drm_helper_hpd_irq_event(sil902x->bridge.dev); + + return IRQ_HANDLED; +} + +static int sil902x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + unsigned int status = 0; + struct sil902x *sil902x; + u8 chipid[4]; + int ret; + + sil902x = devm_kzalloc(dev, sizeof(*sil902x), GFP_KERNEL); + if (!sil902x) + return -ENOMEM; + + sil902x->i2c = client; + sil902x->regmap = devm_regmap_init_i2c(client, &sil902x_regmap_config); + if (IS_ERR(sil902x->regmap)) + return PTR_ERR(sil902x->regmap); + + sil902x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(sil902x->reset_gpio)) { + dev_err(dev, "Failed to retrieve/request reset gpio: %d\n", + PTR_ERR(sil902x->reset_gpio)); + return PTR_ERR(sil902x->reset_gpio); + } + + sil902x_reset(sil902x); + + ret = regmap_write(sil902x->regmap, SIL902X_REG_TPI_RQB, 0x0); + if (ret) + return ret; + + ret = regmap_bulk_read(sil902x->regmap, SIL902X_REG_CHIPID(0), + &chipid, 4); + if (ret) { + dev_err(dev, "regmap_read failed %d\n", ret); + return ret; + } + + if (chipid[0] != 0xb0) { + dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n", + chipid[0]); + return -EINVAL; + } + + /* Clear all pending interrupts */ + regmap_read(sil902x->regmap, SI902X_INT_STATUS, &status); + regmap_write(sil902x->regmap, SI902X_INT_STATUS, status); + + if (client->irq > 0) { + regmap_write(sil902x->regmap, SI902X_INT_ENABLE, + SI902X_HOTPLUG_EVENT); + + ret = devm_request_threaded_irq(dev, client->irq, NULL, + sil902x_interrupt, + IRQF_ONESHOT, dev_name(dev), + sil902x); + if (ret) + return ret; + } + + sil902x->bridge.funcs = &sil902x_bridge_funcs; + sil902x->bridge.of_node = dev->of_node; + ret = drm_bridge_add(&sil902x->bridge); + if (ret) { + dev_err(dev, "Failed to add drm_bridge\n"); + return ret; + } + + i2c_set_clientdata(client, sil902x); + + return 0; +} + +static int sil902x_remove(struct i2c_client *client) + +{ + struct sil902x *sil902x = i2c_get_clientdata(client); + + drm_bridge_remove(&sil902x->bridge); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id sil902x_dt_ids[] = { + { .compatible = "sil,sil9022", }, + { } +}; +MODULE_DEVICE_TABLE(of, sil902x_dt_ids); +#endif + +static const struct i2c_device_id sil902x_i2c_ids[] = { + { "sil9022", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sil9022_id); + +static struct i2c_driver sil902x_driver = { + .probe = sil902x_probe, + .remove = sil902x_remove, + .driver = { + .name = "sil902x", + .of_match_table = of_match_ptr(sil902x_dt_ids), + }, + .id_table = sil902x_i2c_ids, +}; +module_i2c_driver(sil902x_driver); + +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("SIL902x RGB -> HDMI bridges"); +MODULE_LICENSE("GPL"); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html