On Wed, Dec 23, 2015 at 11:58:37AM +0100, Paul Kocialkowski wrote: > LP872x regulators are made active via the EN pin, which might be hooked to a > GPIO. This adds support for driving the GPIO high when the driver is in use. > > Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx> > --- > .../devicetree/bindings/regulator/lp872x.txt | 1 + > drivers/regulator/lp872x.c | 33 ++++++++++++++++++++-- > include/linux/regulator/lp872x.h | 2 ++ > 3 files changed, 33 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt > index 7818318..0559c25 100644 > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt > @@ -28,6 +28,7 @@ Optional properties: > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. > + - ti,enable-gpio: GPIO specifier for EN pin control of LP872x devices. Should be "-gpios" instead of "-gpio". Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
