Hi Cory, On 10.12.2015 06:00, Cory Tusar wrote: > This commit adds support to the eeprom_93x46 driver allowing a GPIO line > to function as a 'select' or 'enable' signal prior to accessing the > EEPROM. > > Signed-off-by: Cory Tusar <cory.tusar@xxxxxxxxxxxxxxxxx> > Tested-by: Chris Healy <chris.healy@xxxxxxxx> > --- > drivers/misc/eeprom/eeprom_93xx46.c | 35 +++++++++++++++++++++++++++++++++++ > include/linux/eeprom_93xx46.h | 3 +++ > 2 files changed, 38 insertions(+) > > diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c > index d50bc17..d28fac2 100644 > --- a/drivers/misc/eeprom/eeprom_93xx46.c > +++ b/drivers/misc/eeprom/eeprom_93xx46.c > @@ -10,11 +10,13 @@ > > #include <linux/delay.h> > #include <linux/device.h> > +#include <linux/gpio/consumer.h> > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/mutex.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/of_gpio.h> > #include <linux/slab.h> > #include <linux/spi/spi.h> > #include <linux/sysfs.h> > @@ -343,6 +345,20 @@ static ssize_t eeprom_93xx46_store_erase(struct device *dev, > } > static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase); > > +static void select_assert(void *context) > +{ > + struct eeprom_93xx46_dev *edev = context; > + > + gpiod_set_value_cansleep(edev->pdata->select, 1); > +} > + > +static void select_deassert(void *context) > +{ > + struct eeprom_93xx46_dev *edev = context; > + > + gpiod_set_value_cansleep(edev->pdata->select, 0); > +} > + > static const struct of_device_id eeprom_93xx46_of_table[] = { > { .compatible = "eeprom-93xx46", }, > { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, }, > @@ -357,6 +373,8 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi) > struct device_node *np = spi->dev.of_node; > struct eeprom_93xx46_platform_data *pd; > u32 tmp; > + int gpio; > + enum of_gpio_flags of_flags; > int ret; > > pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL); > @@ -381,6 +399,23 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi) > if (of_property_read_bool(np, "read-only")) > pd->flags |= EE_READONLY; > > + gpio = of_get_named_gpio_flags(np, "select-gpios", 0, &of_flags); > + if (gpio_is_valid(gpio)) { > + unsigned long flags = > + of_flags == OF_GPIO_ACTIVE_LOW ? GPIOF_ACTIVE_LOW : 0; > + > + ret = devm_gpio_request_one(&spi->dev, gpio, flags, > + "eeprom_93xx46_select"); > + if (ret) > + return ret; > + > + pd->select = gpio_to_desc(gpio); > + pd->prepare = select_assert; > + pd->finish = select_deassert; > + > + gpiod_direction_output(pd->select, 0); > + } > + > if (of_id->data) { > const struct eeprom_93xx46_devtype_data *data = of_id->data; > > diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h > index 92fa4c3..03f3435 100644 > --- a/include/linux/eeprom_93xx46.h > +++ b/include/linux/eeprom_93xx46.h > @@ -3,6 +3,8 @@ > * platform description for 93xx46 EEPROMs. > */ > > +#include <linux/of_gpio.h> > + You need just "struct gpio_desc;" instead of the include here, please fix. > struct eeprom_93xx46_platform_data { > unsigned char flags; > #define EE_ADDR8 0x01 /* 8 bit addr. cfg */ > @@ -21,4 +23,5 @@ struct eeprom_93xx46_platform_data { > */ > void (*prepare)(void *); > void (*finish)(void *); > + struct gpio_desc *select; > }; > Reviewed-by: Vladimir Zapolskiy <vz@xxxxxxxxx> -- With best wishes, Vladimir -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html