This commit adds support to the eeprom_93x46 driver allowing a GPIO line to function as a 'select' or 'enable' signal prior to accessing the EEPROM. Signed-off-by: Cory Tusar <cory.tusar@xxxxxxxxxxxxxxxxx> Tested-by: Chris Healy <chris.healy@xxxxxxxx> --- drivers/misc/eeprom/eeprom_93xx46.c | 35 +++++++++++++++++++++++++++++++++++ include/linux/eeprom_93xx46.h | 3 +++ 2 files changed, 38 insertions(+) diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index d50bc17..d28fac2 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -10,11 +10,13 @@ #include <linux/delay.h> #include <linux/device.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/slab.h> #include <linux/spi/spi.h> #include <linux/sysfs.h> @@ -343,6 +345,20 @@ static ssize_t eeprom_93xx46_store_erase(struct device *dev, } static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase); +static void select_assert(void *context) +{ + struct eeprom_93xx46_dev *edev = context; + + gpiod_set_value_cansleep(edev->pdata->select, 1); +} + +static void select_deassert(void *context) +{ + struct eeprom_93xx46_dev *edev = context; + + gpiod_set_value_cansleep(edev->pdata->select, 0); +} + static const struct of_device_id eeprom_93xx46_of_table[] = { { .compatible = "eeprom-93xx46", }, { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, }, @@ -357,6 +373,8 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi) struct device_node *np = spi->dev.of_node; struct eeprom_93xx46_platform_data *pd; u32 tmp; + int gpio; + enum of_gpio_flags of_flags; int ret; pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL); @@ -381,6 +399,23 @@ static int eeprom_93xx46_probe_dt(struct spi_device *spi) if (of_property_read_bool(np, "read-only")) pd->flags |= EE_READONLY; + gpio = of_get_named_gpio_flags(np, "select-gpios", 0, &of_flags); + if (gpio_is_valid(gpio)) { + unsigned long flags = + of_flags == OF_GPIO_ACTIVE_LOW ? GPIOF_ACTIVE_LOW : 0; + + ret = devm_gpio_request_one(&spi->dev, gpio, flags, + "eeprom_93xx46_select"); + if (ret) + return ret; + + pd->select = gpio_to_desc(gpio); + pd->prepare = select_assert; + pd->finish = select_deassert; + + gpiod_direction_output(pd->select, 0); + } + if (of_id->data) { const struct eeprom_93xx46_devtype_data *data = of_id->data; diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h index 92fa4c3..03f3435 100644 --- a/include/linux/eeprom_93xx46.h +++ b/include/linux/eeprom_93xx46.h @@ -3,6 +3,8 @@ * platform description for 93xx46 EEPROMs. */ +#include <linux/of_gpio.h> + struct eeprom_93xx46_platform_data { unsigned char flags; #define EE_ADDR8 0x01 /* 8 bit addr. cfg */ @@ -21,4 +23,5 @@ struct eeprom_93xx46_platform_data { */ void (*prepare)(void *); void (*finish)(void *); + struct gpio_desc *select; }; -- 2.4.10 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html