Hi, I'm sending v5 with following changes: - in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read. - in 3/5 - addressed comments from Born Helgaas about usage of a standard PCI capabilities register names and rename link training function to the way that other Designware based drivers use. - in 5/5 - addressed a comment from Bjorn Andersson about regulator label duplication. Comments are welcome! The previous v4 of the patch set can be found at [1]. regards, Stan [1] https://lkml.org/lkml/2015/12/3/370 Stanimir Varbanov (5): PCI: designware: ensure ATU is enabled before IO/conf space accesses DT: PCI: qcom: Document PCIe devicetree bindings PCI: qcom: Add Qualcomm PCIe controller driver ARM: dts: apq8064: add pcie devicetree node ARM: dts: ifc6410: enable pcie dt node for this board .../devicetree/bindings/pci/qcom,pcie.txt | 233 ++++++++ MAINTAINERS | 7 + arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 26 + arch/arm/boot/dts/qcom-apq8064.dtsi | 36 ++ drivers/pci/host/Kconfig | 10 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-designware.c | 7 + drivers/pci/host/pcie-qcom.c | 617 ++++++++++++++++++++ 8 files changed, 937 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt create mode 100644 drivers/pci/host/pcie-qcom.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
