Hi all, This is later patch set for generic onboard HUB dirver [1], since I find it can apply for all generic onboard USB devices, so I changed a little for it, it should be work for the use case found at imx6qdl udoo board, but several people have comments for its design, I mark RFC for disucssion, and see how to implement it properly. The purpose for this patch set is to let the USB handle platform parameters properly, since some usb devices need to pre-setup before it can be recognized by controller [2], some usb devices has more interfaces for others use, like i2c, gpios, etc.[3] Thanks. [1] http://www.spinics.net/lists/linux-usb/msg134082.html [2] http://www.spinics.net/lists/linux-usb/msg131502.html [3] http://marc.info/?l=linux-usb&m=142772952730243&w=2 Peter Chen (5): usb: hub: add device tree support for populating onboard usb device doc: dt-binding: generic onboard USB device usb: misc: generic_onboard_hub: add generic onboard USB device driver usb: chipidea: host: let the hcd know's parent device node ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property .../bindings/usb/generic-onboard-device.txt | 31 +++++ MAINTAINERS | 7 + arch/arm/boot/dts/imx6qdl-udoo.dtsi | 35 ++--- drivers/usb/chipidea/host.c | 18 ++- drivers/usb/core/hub.c | 37 ++++++ drivers/usb/misc/Kconfig | 10 ++ drivers/usb/misc/Makefile | 1 + drivers/usb/misc/generic_onboard_device.c | 144 +++++++++++++++++++++ 8 files changed, 258 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/generic-onboard-device.txt create mode 100644 drivers/usb/misc/generic_onboard_device.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
