Add a "serial1" alias for the serial console (it's labeled "uart1").
Drop the "console=" parameter from the kernel command line, as it's no
longer needed for DT-based platforms.
Add the serial port config to chosen/stdout-path.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 8c24975e8f9d6638..191b565449509778 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -23,9 +23,13 @@
reg = <0x40000000 0x8000000>;
};
+ aliases {
+ serial1 = &uart1;
+ };
+
chosen {
- bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
- stdout-path = &uart1;
+ bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+ stdout-path = "serial1:115200n8";
};
gpio_keys {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
