Change the console alias to "serial0", for consistency with other boards (the first unlabeled serial port is always called "serial0"). Drop the "console=" parameters from the kernel command line, as they're no longer needed for DT-based platforms. Add the serial port config to chosen/stdout-path. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 78a21f2828dff6d1..296a0d1c1fe266c7 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -20,12 +20,12 @@ compatible = "renesas,armadillo800eva", "renesas,r8a7740"; aliases { - serial1 = &scifa1; + serial0 = &scifa1; }; chosen { - bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; - stdout-path = &scifa1; + bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw"; + stdout-path = "serial0:115200n8"; }; memory { @@ -232,7 +232,7 @@ renesas,function = "gether"; }; - scifa1_pins: serial1 { + scifa1_pins: serial0 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html