Am Dienstag, den 08.12.2015, 10:54 +0100 schrieb Steffen Trumtrar: > Add the binding documentation for the Epson RX6110 RTC. > > Acked-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> although I'd like a small change to be made below: > --- > Changes since v2: > - removed the size field in i2c binding > > .../devicetree/bindings/rtc/epson,rx6110.txt | 39 ++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > new file mode 100644 > index 000000000000..71353542a59d > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > @@ -0,0 +1,39 @@ > +Epson RX6110 Real Time Clock > +============================ > + > +The Epson RX6110 can be used with SPI or I2C busses. The kind of > +bus depends on the SPISEL pin and can not be configured via software. > + > +I2C mode > +-------- > + > +Required properties: > + - compatible: should be: "epson,rx6110" > + - reg : offset of the register set of the device That should be the I2C address of the device, as in: git grep "reg.*I2C address" Documentation/ regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
