Add the binding documentation for the Epson RX6110 RTC.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
---
Changes since v2:
- removed the size field in i2c binding
.../devicetree/bindings/rtc/epson,rx6110.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt
diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
new file mode 100644
index 000000000000..71353542a59d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
@@ -0,0 +1,39 @@
+Epson RX6110 Real Time Clock
+============================
+
+The Epson RX6110 can be used with SPI or I2C busses. The kind of
+bus depends on the SPISEL pin and can not be configured via software.
+
+I2C mode
+--------
+
+Required properties:
+ - compatible: should be: "epson,rx6110"
+ - reg : offset of the register set of the device
+
+Example:
+
+ rtc: rtc@32 {
+ compatible = "epson,rx6110"
+ reg = <0x32>;
+ };
+
+SPI mode
+--------
+
+Required properties:
+ - compatible: should be: "epson,rx6110"
+ - reg: chip select number
+ - spi-cs-high: RX6110 needs chipselect high
+ - spi-cpha: RX6110 works with SPI shifted clock phase
+ - spi-cpol: RX6110 works with SPI inverse clock polarity
+
+Example:
+
+ rtc: rtc@3 {
+ compatible = "epson,rx6110"
+ reg = <3>
+ spi-cs-high;
+ spi-cpha;
+ spi-cpol;
+ };
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
