On 10/31/13 07:56, Shawn Guo wrote: > On Tue, Oct 29, 2013 at 02:11:43PM +0200, Valentin Raevsky wrote: >> Add initial support for cm-fx6 module. >> >> cm-fx6 is a module based on mx6q SoC with the following features: >> - Up to 4GB of DDR3 >> - 1 LCD/DVI output port >> - 1 HDMI output port >> - 2 LVDS LCD ports >> - Gigabit Ethernet >> - Analog Audio >> - CAN >> - SATA >> - NAND >> - PCIE >> >> This patch allows to boot up the module, configures the serial console, >> the Ethernet adapter and the heartbeat led. >> >> cm-fx6 is embedded inside the Utilite computer. >> >> Signed-off-by: Valentin Raevsky <valentin@xxxxxxxxxxxxxx> >> Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> >> --- >> >> Shawn, can this still be applied for 3.13 ? > > Sorry, it's late for 3.13. Applied for 3.14 with a small fix-up below. Thanks! > >> >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/imx6q-cm-fx6.dts | 53 ++++++++++++++++++++++++++++++++++++ >> 2 files changed, 54 insertions(+) >> create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 641b3c9..87ca7ca 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ >> imx6q-sabrelite.dtb \ >> imx6q-sabresd.dtb \ >> imx6q-sbc6x.dtb \ >> + imx6q-cm-fx6.dtb \ > > If you look at the list, you can find that they are sorted > alphabetically. I just moved it around to maintain the order. Sorry for that. Thanks for fixing this up! -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
