On Tue, Oct 29, 2013 at 02:11:43PM +0200, Valentin Raevsky wrote: > Add initial support for cm-fx6 module. > > cm-fx6 is a module based on mx6q SoC with the following features: > - Up to 4GB of DDR3 > - 1 LCD/DVI output port > - 1 HDMI output port > - 2 LVDS LCD ports > - Gigabit Ethernet > - Analog Audio > - CAN > - SATA > - NAND > - PCIE > > This patch allows to boot up the module, configures the serial console, > the Ethernet adapter and the heartbeat led. > > cm-fx6 is embedded inside the Utilite computer. > > Signed-off-by: Valentin Raevsky <valentin@xxxxxxxxxxxxxx> > Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> > --- > > Shawn, can this still be applied for 3.13 ? Sorry, it's late for 3.13. Applied for 3.14 with a small fix-up below. > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6q-cm-fx6.dts | 53 ++++++++++++++++++++++++++++++++++++ > 2 files changed, 54 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 641b3c9..87ca7ca 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ > imx6q-sabrelite.dtb \ > imx6q-sabresd.dtb \ > imx6q-sbc6x.dtb \ > + imx6q-cm-fx6.dtb \ If you look at the list, you can find that they are sorted alphabetically. I just moved it around to maintain the order. Shawn > imx6sl-evk.dtb \ > vf610-twr.dtb > dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
