On 07/12/15 18:24, Geert Uytterhoeven wrote:
Add device nodes for the L2 caches, and link the CPU node to its L2
cache node.
The L2 cache for the Cortex-A57 CPU cores is 2 MiB large (organized as
128 KiB x 16 ways), and requires the following settings:
- Tag RAM latency: 3 cycles,
- Data RAM latency: 4 cycles,
- Data RAM setup: 1 cycles,
The L2 cache for the Cortex-A53 CPU cores is 512 KiB large (organized as
32 KiB x 16 ways).
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
What are the DT bindings for Cortex-A57/A53 L2 cache controllers?
There's no special binding specific to cpus. Yes the generic binding
should be fine as we don't have to deal with their configuration in the
kernel and assumed to be all preconfigured by early secure boot code.
v2:
- New.
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 816400c1bee604db..30063546c7e9bbea 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -35,9 +35,24 @@
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
+ next-level-cache = <&L2_CA57>;
};
};
+ L2_CA57: cache-controller@0 {
+ compatible = "cache";
+ arm,data-latency = <4 4 1>;
+ arm,tag-latency = <3 3 3>;
Interesting, only PL2xx/3xx cache controller driver reads this from the
DT and configures the controller. The integrated L2 found in
A15/A7/A57/A53 needs doesn't make use of these values from the DT.
I assume these values are tested and configured by boot loaders before
entering Linux. I am not objecting to their presence here but I am
mentioning that it's mostly of no use for Linux as software running at
higher EL might not allow these configuration to be modified.
--
Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
