On Wed, Dec 2, 2015 at 10:06 AM, Kapil Hali <kapilh@xxxxxxxxxxxx> wrote: > Hi Rob, > > On 12/2/2015 8:56 PM, Rob Herring wrote: >> On Tue, Dec 01, 2015 at 11:24:05AM -0500, Kapil Hali wrote: >>> Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's >>> Northstar Plus CPU to the 32-bit ARM CPU device tree binding >>> documentation file and create a new binding documentation for >>> Northstar Plus CPU. >>> >>> Signed-off-by: Kapil Hali <kapilh@xxxxxxxxxxxx> >>> --- >>> .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++ >>> Documentation/devicetree/bindings/arm/cpus.txt | 1 + >>> 2 files changed, 40 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >>> >>> diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >>> new file mode 100644 >>> index 0000000..bf08872 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >>> @@ -0,0 +1,39 @@ >>> +Broadcom Northstar Plus SoC CPU Enable Method >>> +--------------------------------------------- >>> +This binding defines the enable method used for starting secondary >>> +CPUs in the following Broadcom SoCs: >>> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 >>> + >>> +The enable method is specified by defining the following required >>> +properties in the "cpus" device tree node: >>> + - enable-method = "brcm,bcm-nsp-smp"; >>> + - secondary-boot-reg = <...>; >> >> Both of these are supposed to be per cpu core. > > 'enable-method' if not found in 'cpu' node is looked at in the 'cpus' > node. Except for two-three SoC families, 'enable-method' is within > 'cpus' node. Is my interpretation incorrect? Did I miss anything here? I'm not sure how you counted, but it is much more than 2-3 that are correct (including all of PPC). It is quite mixed in dts files, but it is documented to be per cpu node, so lets follow the documentation please. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
