On 02/12/15 08:06, Kapil Hali wrote: >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt >>> @@ -0,0 +1,39 @@ >>> +Broadcom Northstar Plus SoC CPU Enable Method >>> +--------------------------------------------- >>> +This binding defines the enable method used for starting secondary >>> +CPUs in the following Broadcom SoCs: >>> + BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312 >>> + >>> +The enable method is specified by defining the following required >>> +properties in the "cpus" device tree node: >>> + - enable-method = "brcm,bcm-nsp-smp"; >>> + - secondary-boot-reg = <...>; >> >> Both of these are supposed to be per cpu core. > > 'enable-method' if not found in 'cpu' node is looked at in the 'cpus' > node. Except for two-three SoC families, 'enable-method' is within > 'cpus' node. Is my interpretation incorrect? Did I miss anything here? So, what do we do from here? I would appreciate a timely answer from the DT maintainers here so we can decide on the fate of this patch series for 4.5. Thank you -- Florian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
