Split PWM pins into separate pinctrl nodes to allow overrides which
select pins individually. This is useful for carrier boards which use
only one pin for PWM and would like to use the other pin for a
different purpose.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
arch/arm/boot/dts/vf-colibri.dtsi | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index e5949b9..924b660 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -74,12 +74,12 @@
&pwm0 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0>;
+ pinctrl-0 = <&pinctrl_pwm0_a &pinctrl_pwm0_c>;
};
&pwm1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
+ pinctrl-0 = <&pinctrl_pwm1_b &pinctrl_pwm1_d>;
};
&uart0 {
@@ -195,16 +195,26 @@
>;
};
- pinctrl_pwm0: pwm0grp {
+ pinctrl_pwm0_a: pwm0agrp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1182
+ >;
+ };
+
+ pinctrl_pwm0_c: pwm0cgrp {
+ fsl,pins = <
VF610_PAD_PTB1__FTM0_CH1 0x1182
>;
};
- pinctrl_pwm1: pwm1grp {
+ pinctrl_pwm1_b: pwm1bgrp {
fsl,pins = <
VF610_PAD_PTB8__FTM1_CH0 0x1182
+ >;
+ };
+
+ pinctrl_pwm1_d: pwm1dgrp {
+ fsl,pins = <
VF610_PAD_PTB9__FTM1_CH1 0x1182
>;
};
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
