On 02/12/15 18:03, Florian Fainelli wrote: > 2015-11-30 12:58 GMT-08:00 Simon Arlott <simon@xxxxxxxxxxx>: >> The BCM63xx contains a soft-reset controller activated by setting >> a bit (that must previously have cleared). >> >> Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx> >> --- >> MAINTAINERS | 1 + >> drivers/reset/Kconfig | 9 +++ >> drivers/reset/Makefile | 1 + >> drivers/reset/reset-bcm63xx.c | 134 ++++++++++++++++++++++++++++++++++++++++++ >> 4 files changed, 145 insertions(+) >> create mode 100644 drivers/reset/reset-bcm63xx.c > > > Could you create a bcm directory and then add your reset-bcm63xx.c > file there? I have a pending submission for the BCM63138 reset > controller which is not at all using the same structure and will share > nothing with your driver. > Ok, I'll call it reset-bcm6345.c to avoid confusion. > >> +static int bcm63xx_reset_xlate(struct reset_controller_dev *rcdev, >> + const struct of_phandle_args *reset_spec) >> +{ >> + struct bcm63xx_reset_priv *priv = to_bcm63xx_reset_priv(rcdev); >> + >> + if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells)) >> + return -EINVAL; >> + >> + if (reset_spec->args[0] >= rcdev->nr_resets) >> + return -EINVAL; > > Should not these two things be moved to the core reset controller code > based on the #reset-cells value? > This has already been removed from the next version of the patch. > >> + if (of_property_read_u32(np, "offset", &priv->offset)) >> + return -EINVAL; >> + >> + /* valid reset bits */ >> + if (of_property_read_u32(np, "mask", &priv->mask)) >> + priv->mask = 0xffffffff; >> + >> + priv->rcdev.owner = THIS_MODULE; >> + priv->rcdev.ops = &bcm63xx_reset_ops; >> + priv->rcdev.nr_resets = 32; > > Should not that come from Device Tree, or be computed based on the > mask property, like hweight_long() or something along these lines? The "mask" property has been removed. It will assume 32 resets and rely on the rest of the DT to only refer to valid bits. -- Simon Arlott -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html